Difference Between Dexter EZ-Lube Axles
Published 07/27/2018
Products Featured in This Question
Question:
It would appear you list two 2200# dexter axles. The 20545I-EZ-72-10 and the 20545I-EZ-72-15 What is the difference between them?
asked by: John D
Expert Reply:
Those axles do not have the same weight rating but are otherwise the same.
The Dexter Trailer Idler Axle # 20545I-EZ-72-10 is rated for 2,200 lbs while the Dexter Trailer Axle # 20545I-EZ-72-15 is rated for 2,000 lbs.
Apart from that, each axle measures 72" hub face to hub face and 58" spring center to spring center. They use straight, EZ-Lube spindles and have idler hubs that have a 5 on 4-1/2" bolt pattern.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Q&A: Difference Between Tire Sizes 4.80-12 and 5.30-12
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Suspension Enhancement
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Q&A: Does Trailer Spring Seat Need to be Welded to Axle
- Q&A: Can the Spring Perches of Trailer Axles Get Moved
- Q&A: Replacement Trailer Hub for Dexter 8-259 Idler Hub
- Q&A: Is It Required The Spring Seat Be Welded to Trailer Axle
- Q&A: Can Spring Seats be Removed and Welded On in Different Spots on Dexter Trailer Axle 20440I-ST-60
- Video: Mount: SumoSprings Solo Custom Helper Springs on a 2023 Toyota Tacoma
- Shop: Spring Seat for Typical 2,000-lb, Round Trailer Axles with 1-3/4" Diameter - Qty 1
- Shop: Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
- Shop: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Front Axle
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1