Which Brake Assembly Does Part Numbers B10E-21 & B10E-22 Correspond to?
Updated 07/12/2018 | Published 07/11/2018
Products Featured in This Question
Question:
Hello, I have a number off the back plate of a trailer brake assembly that is B10E-21. I believe this is a left hand 10x2.25 brake. I am assuming perhaps that the right hand would be a B10E-22? Do you have these parts and how much are they?
asked by: Jeff D
0
Expert Reply:
Part number B10E-21 corresponds to Electric Trailer Brake Assembly # AKEBRK-35L. This is the drivers side assembly.
Part number B10E-22 corresponds to Electric Trailer Brake Assembly # AKEBRK-35R. This is the passenger side assembly.
expert reply by:
Timothy G
0
Product Page this Question was Asked From
Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Electric Trailer Brake Assembly - 10" - Left Hand - 3,500 lbs
- Search Results: trailer hubs and drums
- Shop: Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Shop: Vehicle Tow Bar Brake System
- Search Results: gas shocks
- Shop: Roadmaster Stop Light Switch Kit
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: fcr10dcdta
- Search Results: bearing buddy caps
- Search Results: bearing protectors
- Shop: Base Plate for Tow Bar
- Video: Review of the Replacement Hinge for Furrion 2-in-1 Range Oven
- Search Results: lasalle bristol rv waste valves
- Search Results: b10e~21
- Video: Hands-On with the Electric Trailer Brake Assembly
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Lens for Optronics Part # 20327-02
- Q&A: Replacement Hub & Drum Assembly for Dexter 5,200 lb. Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Q&A: Replacement For T-23973 Grease Seal on Trailer
- Q&A: Replacement Grease Seal for Axletek Hub BD-545
- Q&A: Bearing Kit Recommendation for 3,500 lb Lippert Axle
- Q&A: Cross Reference Chart for Kodiak Trailer Disk Brake Pads to Automotive Applications
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Slipper Spring Trailer Suspension System Review