Slide Topper Recommendation for 2018 Grand Design Imagine 2600 RB

Question

Question:

We have a Grand Design 2018 Imagine 2600 RB.

asked by: Robert B

0

Expert Reply:

Grand Design says the slide out on your 2018 Imagine 2600RB is 140" edge to edge, so you would need a 12-1/2 ft awning like the # LCV000177334 that you referenced.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 9

Hey Tom, thanks for reaching out. Yes you are on the right track. The Ducted Air Distribution Box #LC64DX (2024040312) will indeed work with the Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump #FR24TQ (2025008216). They are made…

view full answer...

Answer 10

I sure can BJ. To add a keyless entry lock to your 2025 Airstream, I recommend the Bauer NE RV Entry Door Lock for Trailers item #BA33UR for a left handed lock or item #BA53UR for a right handed lock. These locks have Bluetooth capability and a PIN…

view full answer...

Answer 11

If what you have now Chad is pretty flat at 26 inches then the best replacement size would be 25-1/4 inches like you mentioned. Since you wanted to increase the capacity you would want the part #e57SR which is for 4k trailer axles.

view full answer...

Answer 12

Ron, you’ll be fine with two people. Each Thomas Payne Rest Easy Trifold Loveseat - whether it’s the Dellmead #TP49KR, Driftwood #TP69KR, or McCoy #TP79KR - weighs around 153 pounds, and it ships in two manageable sections (the base and the back), so…

view full answer...

Slide Topper Recommendation for 2018 Grand Design Imagine 2600 RB

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching