How to Determine Fitment of the Trailer Idler Hub Assembly # AKIHUB-555-35-EZ-K
Published 06/15/2018
Products Featured in This Question
Question:
i have a flexiride 3500 lb half axle fr-3500-b part number. i am wondering if this hub will fit on the stud that comes stock on the half axle. any info would be greatly appreciated
asked by: Brent L
Expert Reply:
The Trailer Idler Hub Assembly # AKIHUB-555-35-EZ-K is compatible with 3,500 lb trailer axles that use the #84 spindles like part # TRU24FR.
You can determine if it will fit by pulling your hub and checking the bearings and grease seal that is on your current hub. This hub uses the inner bearing # L68149 and outer bearing # L44649 and it comes with a grease seal that has an inner diameter of 1.719". If your current hub uses the same then this is an exact replacement. If you can't find part numbers, then you will need to take a digital caliper and measure the places where your bearings and seal sit on your spindle to the 3rd decimal (0.123).
If your spindle measures 1.378" for the inner bearing, 1.063" for the outer bearing, and 1.719" for the grease seal then this will fit.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- Pre-Greased
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Need Replacement For UFP PG1090 Actuator On Magic Tilt Single Axle Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Looking For Hub With 68149 Inner And 67048 Outer Bearings
- Q&A: 5-Lug Trailer Hubs With Inner Bearing L68149 & Outer Bearing L44649 for Boat Trailer
- Q&A: Upgrade to Replace Fulton Boat Trailer Jack FTJ120W0301
- Q&A: Installation of Emergency Break Away Cable Repair Kit for Dexter Axle A-60 Brake Actuators
- Q&A: Will The etrailer Hub AKIHUB-545-35-G-EZ-K Fit A 10 Inch Wheel?
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Article: How to Change the Axle on your Boat Trailer Without Leaving your Driveway