Adapters to Connect Roadmaster Falcon 2 Tow Bar to Blue Ox Bolt-On Base Plate Bracket Kit

Question

Question:

will the roadmasater RM031 fit the blue ox BX88230? i have a road master falcon 2 i need to put new ends on and was hoping those 2 parts go together? if not which ones will work.. bumper on my CJ is very strong and will work with bolt on base plate as that is what it has now thanks

asked by: Reynold

0

Expert Reply:

Yes, to connect the Blue Ox bolt-on base plate kit, part # BX88230, to the Roadmaster Falcon 2 tow bar, part # RM-520, the # RM-031 adapters are just what you need.

The other option is the Blue Ox adapters, part # BX88151, but either ones will work for you.

expert reply by: Charles S

0

Answer 1

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 2

Your picture is of an old Tekonsha Weathertronic electric brake controller. The wire color coding is as follows: White - Ground Black - Positive terminal on the battery Blue - To the trailer brakes Red - Cold side of the stop light switch. This will…

view full answer...

Answer 3

I completely get where you're coming from but the only time we ever say mix-matching tire sizes or even ply ratings is acceptable is in an emergency situation where you need to hobble to the nearest trailer shop for a repair. Aside from that…

view full answer...

Answer 4

If you need to change out the complete wiring harness on your 2007 Nissan Frontier then you will need the Replacement Wiring Harness #118267. If you have the US carr connector still intact then you can use the Pollak #PK11893, but if you just have…

view full answer...

Answer 5

It depends on which tow bar you use. I would go with 24 inches on center between the tabs on Blue Ox base plates #BX88230. That will make them compatible with most, if not all, Blue Ox tow bars. I have included a link to the Blue Ox tow bars for…

view full answer...

Answer 6

We don't have the specific pin, but I have a solution for you. Since Breakaway Switches are universal, I recommend you replace the entire switch with part #3802348 to go with your ESCO breakaway systems.

view full answer...

Answer 7

The reason for this comes down to safety and the additional pressures that would be exerted on the components when your Blue Ox Ascent #BX4370 tow bar is not level. The additional force that is put on these components ultimately makes it more likely…

view full answer...

Answer 8

Hello Doug, thanks for reaching out. We do not have a template for exactly where to cut. I have included a snip from the instruction for the #BLU33FR base plate that shows roughly where to trace and cut. This and the installation video I linked below…

view full answer...

Adapters to Connect Roadmaster Falcon 2 Tow Bar to Blue Ox Bolt-On Base Plate Bracket Kit

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching