Replacement Brake and Hub Assemblies for Travel Trailer

Updated 05/07/2018 | Published 05/04/2018

Products Featured in This Question

Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs

(1556)

$408.03

4" Carbon Fiber Digital Caliper

(26)

$12.46

Question:

i have a 2011 keystone outback 260FL what brakes do i need to purchase if i want to change them also the drum?

asked by: Denis K

Expert Reply:

To help you with replacement drums and brake assemblies, I need more information on your 2011 Keystone Outback 260FL. I need to either know the bearing numbers and seal number or know a few spindle dimensions.

The bearing numbers can be found by pulling one hub and looking at the face of the inner and outer bearing. Each one will have a number printed into the face of the bearing. The seal will also have a number printed into it. If you can't find these numbers, then we will need to measure the spindle in the bearing locations using a digital caliper like # PTW80157. I've attached a photo and an article to assist.

With the bearing and seal numbers or those spindle measurements I can help you get the correct brake assemblies as well as hub/drum assemblies for your travel trailer.

expert reply by: Jason S