Dimensions for Dutton-Lainson Hand Winch # DL15337

Question

Question:

I am looking for the dimensions on a product Dutton Lainson DL15337. I have a limited space on my boat trailer for a replacement winch and I would rather not deal with a return if possible. Thanks

asked by: Bill

0

Expert Reply:

I went out to our warehouse to take a look at the Dutton-Lainson Hand Winch # DL15337 that you referenced in your question.

I measured a height of right at 5-1/4 inches and a total length of 8 inches. It has a width of 5-1/2 inches. The mounting base measures 5 inches long and 4 inches wide. I have attached an image with these dimensions labeled that you can also take a look at. If you need any other specific dimensions, please let me know and I will be happy to get them for you.

This is a really nice, single-speed hand winch with a 1,400 pound capacity. The 20 foot long strap is already installed and the handle is included.

expert reply by: Chris R

0

click to enlarge

Answer 1

The Dutton-Lainson Hand Winch part #DL15303 comes with a 9-1/2" long handle. The only available handle offered in a shorter length is the Replacement Handle for Dutton-Lainson Single Speed Hand Winch part #DL70305 which measures 7" long.

view full answer...

Answer 2

We might have a replacement winch handle that would work for your trailer. But without knowing the brand of your winch or the width of the stud where the handle would mount I really can't say for certain. The slot for mounting of the handle…

view full answer...

Answer 3

I have a replacement winch option for you, but unfortunately your Dutton-Lainson DL1402 not having the A means it was made between 1991-1999. Unfortunately the rebuild kit for these older winches was discontinued a while back. The only option would…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Dimensions for Dutton-Lainson Hand Winch # DL15337

Continue Researching