Replacement Landing Gear Legs for an Open Range 430RLS 5th Wheel Trailer
Question:
I have a open range roamer 430rls 5th wheel RV. The rear passanger side Jack needs replaced. The existing motor is fine. I am looking for just the sq tube and inner tube that travels. With all internal parts so I can mount the existing motor to it.
asked by: Tim
Expert Reply:
In order to find the correct replacement landing gear leg for your Open Range 430RLS 5th wheel trailer I would need to know the brand and part number of the landing gear leg you currently have on your trailer. These should be stamped or etched into the legs themselves but if you can not find this then you would need to contact the manufacturer of the trailer with your VIN.
Another option you have for replacement would be to do some measuring. I would need the overall length of the outer tube in addition to the distance between the weld stops in order to help you determine the correct replacement. For example, the Stromberg Carlson Landing Gear Leg part # LG-179014 is a follow leg which has an outer tube measuring 29-1/2" with weld stops 17-1/2" apart (outside to outside).
Product Page this Question was Asked From
Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Stromberg Carlson
more information >
Continue Researching
- Q&A: Replacement Landing Gear for 2010 Open Range 5th-Wheel Trailer
- Shop: Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System
- Shop: Replacement Follow Jack w/ Drop Leg for Stromberg Carlson Landing Gear - 29-1/2"
- Shop: JT's Strong Arm Jack Stabilizer Kit for 5th Wheel RVs w/ 58" or More Between Landing Gear
- Search Results: slide out stabilizers
- Search Results: stabilizer jacks
- Search Results: slide cables
- Search Results: stabilizer bracket
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Search Results: lg~179014
- Shop: Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System
- Shop: Replacement 24-1/2" Right Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
- Video: Complete Breakdown of the Replacement Lead Leg for Venture 5th Wheel RV Landing Gear
- Shop: Replacement Lead Leg for Venture 5th Wheel RV Landing Gear
- Q&A: Difference Between LC179013 & LG-179013 Landing Gear Legs
- Q&A: Repair Kit for Lippert LCI PN241846 Lead Leg on Landing Gear System
- Q&A: Does Lippert Replacement Landing Gear Leg LC119102 Replace LC241846
- Q&A: Landing Gear Follower Leg Recommendation for 2008 Keystone Challenger 32 SAT
- Q&A: Recommended Dual-Motor Landing Gear To Replace Single Motor Landing Gear On Arctic Fox Fifth Wheel
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Finding the Right Trailer Wiring Harness
- Search Results: trailer hitch
- Video: Measuring To Choose The Right Trailer Axle
- Article: Trailer Wiring Diagrams
- Search Results: trailer brake controller
- Shop: Brake Controller
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Accessories and Parts
Tyson L.
7/21/2024
I have a 2015 open range 430 and I’m looking for a jack leg for the right side and I measured the jack and mind is 33 inches but it’s says on here 29 1/2 so what would be the right one