Recommended 5.70-8 Tire and Wheel with Compatible Hub for Axle
Updated 04/11/2018 | Published 04/10/2018
Products Featured in This Question
Question:
I need a 5.7-8 tire with a rim with a center hub for the axle.
asked by: Dave C
Expert Reply:
We do have some options for you to add a 5.7-8 size tire and a hub to your trailer.
For a wheel/tire combination I recommend going with the Kenda 5.70-8 Bias Trailer Tire with Wheel # AM30155. This has a 5 on 4-1/2" bolt pattern and comes with a load range of D (1,075 lbs at 100 psi).
Since 8" wheels are typically installed on 2,000 lb axles you would need the hub assembly # AKIHUB-545-2-EZ-1K if you have L44643 bearings or assembly # AKIHUB-545-2-EZ-2K for L44649 bearings. Both options have a 5 on 4-1/2" bolt pattern that matches up with the tire/wheel that I recommended.
If your bearings do not match either of these assemblies or you don't have a 2,000 lb axle just let me know what you have so I can make some different recommendations.
Product Page this Question was Asked From
Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel - 5 on 4-1/2 - Load Range D
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range D
- 5.70-8
- 8 Inch
- K - 65 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda 5.70-8 Bias Trailer Tire with 8" Galvanized Wheel - 4 on 4 - Load Range C
- Q&A: Recommended 12 Inch Wheels and Tires for 2007 Stinger Motorcycle Trailer
- Q&A: What is Speed Rating of Kenda Karrier ST145/R12 Radial Trailer Tire with 12 Black Mod Wheel
- Q&A: Will a 145/80-12 Trailer Tire Fit in Place of a 4.80-12 Trailer Tire
- Q&A: Recommendation to Replace 155R13 Tires on Boat Trailer
- Q&A: Will Kenda Karrier ST145/R12 Trailer Tire & Wheel Replace 155/80R12 Tires
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" Galvanized Spoke Wheel - 5 on 4-1/2 - LR D
- Shop: Kenda Karrier ST145/R12 Radial Trailer Tire with 12" Black Mod Wheel - 5 on 4-1/2 - LR D
- Q&A: Does Nut Retainer go on Before or After Nut For Easy Grease Trailer Idler Hub Assembly
- Q&A: Finding Correct Trailer Wheels to Match Hubs for a BT8 Spindle
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 13" to 15" - 5 on 4-1/2 - PreGreased
- Shop: BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased