Recommended Front Mounted Hitch for 2006 Ford F-250

Question

Question:

Looking for front bumper hitch for 2006 Ford 250. Can you help?

asked by: David B

0

Expert Reply:

I can help and there is a front mounted hitch that is a fit for your 2006 Ford F-250 and I recommend the Draw-Tite # 65022, which will sit in the opening through the front bumper. It is a 2" hitch with 9,000 lbs of line pull and a vertical load capacity of 500 lbs. The only thing to keep in mind is that installing a front hitch on your F-250 will require you to remove the OEM fog lights to allow the hitch to mount.

I've added a link to a video install of this hitch for you to take a look at as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Both the Draw Tite hitches part #65022 and #65005 have a wall thickness of 3/8 inch.

view full answer...

Answer 2

Hey Bill, so we don't have a direct solution for relocating the fog lights of your 2006 Ford F-250 with the Draw Tite front hitch part #65022 installed but if you check out the attached picture you can see a customer of ours who had some…

view full answer...

Answer 3

The Curt Front Mount Trailer Hitch Receiver #C31014 is the only front receiver that we currently offer for your 2001 Ford F-350 that does not require you to remove the front bumper. For it to mount your F-350 must have the blocker beam on the front.…

view full answer...

Answer 4

While we do have a front-mounted trailer hitch receiver that fits a 2003 Ford F-250, the part model you asked about will not fit as it doesn't have the correct dimensions to line up with your truck and there are no brackets that will allow this.…

view full answer...

Answer 5

I spoke with my contact at Draw-Tite to verify and he said that the OEM fog lights will have to be removed to install Front Mount Receiver, #65022. If you wish to retain the lights they will have to be relocated. I have included a link to the…

view full answer...

Answer 6

The 2002 F-250 has two different styles of front end configurations. If your front end has the blocker beam behind the front bumper and the leaf springs mounted on the inside of the frame rails then you would use the Curt Front Mount Trailer Hitch…

view full answer...

Answer 7

I do have a solution for you to install a front hitch on your 2003 Ford F-350 that will lead the OEM fog lights in tact, but you will need to confirm that your truck has the blocker beam behind the bumper (only found on 4wd versions of this truck, so…

view full answer...

Answer 8

Thanks for reaching out Denis, I'd love to clear the air for you! While I don't have info on the factory that the Draw-Tite Front Mount Trailer Hitch Receiver #65022 is made at, what I can say is that Draw-Tite is one of the leading hitch…

view full answer...

Answer 9

We do indeed have a front mounted receiver that's a fit for the 2001 Excursion, part #65022. The hitch would install directly to the front of the frame members behind the bumper. Installation involves removing the bumper, and sandwiching the…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Front Mounted Hitch for 2006 Ford F-250

Featured Help Information

Miscellaneous Media

Continue Researching