How to Trim 2015 Ram 1500 Plastic Bed Rail Cover to Make Space for Stake Pocket Anchor

Question

Question:

I have a 2015 dodge ram 1500with toneou cover. Want to put stake anchor and want to know how to open the front hole up. The rear hole is ready.

asked by: Phil

0

Expert Reply:

The front stake pocket on your 2015 Ram 1500 is hidden under the plastic rail cap but there should be an outline or slight indentation in the plastic to show you where to make your cutout. I read some online comments from owners who said that slipping a plastic trim tool like those in # PT73HJ under the cap makes it easier to cut out the part that covers the stake pocket. You can use a utility knife or a small rotary tool if you have one.

expert reply by: Adam R

0

click to enlarge

Answer 1

Hi Steven, Thanks for the purchase and we do have the right harness for your 2025 Ram 1500 and the Redarc Liberty Brake Controller #RED24FR. The correct plug-in harness is the following part: - Redarc Plug-and-Play Wiring Harness #331-TPH-020 You can…

view full answer...

Answer 2

Hello Michael, Congrats on the new truck! What is your favorite new feature? Yes, the Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional #RED87CR comes with the vehicle specific pigtail making it a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 6

There sure is Rob and congrats on the new SUV. To add a hitch to your 2026 Hyundai Ioniq 5, I recommend the EcoHitch item #EH72HR. This hitch is custom fit for your Ioniq 5 and comes with all hardware necessary for installation. The crosstube mounts…

view full answer...

Answer 7

Hey Eric! The B&W Trailer Hitch #BW97BR won't cause you to lose the hands free functionality on your 2026 Honda CR-V Hybrid Sport Touring. What it will do is block the sensor right in the middle where the receiver sits. The same is true for…

view full answer...

Answer 8

Hey Nick, thanks for reaching out. The Stealth Hitch #SH52VR is the correct hitch for your 2017 BMW X5. The hitch comes with all necessary installation hardware, but it does not come with any tools. The installation is a bit involved since you have…

view full answer...

Answer 9

Hey Mauricio. The Stealth Hitches Hidden Rack Receiver item #SH87FR will not set off any sensors without your bike rack attached. You'll want to disable them if possible when you use your bike rack because it does block them. This is a common…

view full answer...

Answer 10

Hi Dan! The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13397 you were looking at is the hitch I recommend for your 2026 Honda CR-V Hybrid. This will actually fit the Hybrid and Non-Hybrid models, so you are perfectly good to go…

view full answer...

Answer 11

Hey Rick, We do have a hitch and wiring option for that XC40 Recharge. For the hitch I recommend the Curt #C82ZJ. This is a 2" hitch with a 600lb tongue weight capacity and 4,000lb towing capacity. Simple installation considering it is a no…

view full answer...

How to Trim 2015 Ram 1500 Plastic Bed Rail Cover to Make Space for Stake Pocket Anchor

Product Page this Question was Asked From

Continue Researching