Dimensions of Channel In Rhino-Rack Heavy Duty Crossbars

Question

Question:

what are the dimensions of the c-channel for these bars?

asked by: Jacob M

0

Expert Reply:

The Rhino-Rack heavy duty crossbars # RB1800. The bottom part of the opening is 1.36 inches wide. The top of the opening is 0.86 inches wide. And the overall height of the channel is 0.87 inches tall.

expert reply by: Michael H

0

click to enlarge

Answer 1

The Rhino-Rack Pioneer Platform Roof Tray - Aluminum - 60" Long x 54" Wide #RR95TB that you mentioned requires Rhino-Rack crossbars. You would also need Pioneer Platform Mounting Kit #RR43105. You can provide us with your vehicle's…

view full answer...

Answer 2

Since the Front Runner crossbars have a channel/t-slot on top of them the Rhino Rack adaper part #RR43105 that you referenced would be the correct adapter to allow a Rhino Rack Pioneer Platform to them.

view full answer...

Answer 3

The Yakima OverHaul HD, like part #Y01151-58, uses T-Slots that are 1/4" deep, 13/16" wide, and the top slot is about 3/8" wide so you can actually use the regular T-Bolts that come with the Rhino-Rack Pioneer Platform. The Mounting…

view full answer...

Answer 4

To attach to your round crossbars you will want either the Rhino-Rack Pioneer Platform in a 48"x38" Kit #RR42114BF or the 58"x47" Kit #RR42115BF. The Platform #RR42TB you found is designed to mount with either a set of feet or to…

view full answer...

Answer 5

In order to mount the Rhino-Rack Pioneer Platform Roof Tray part #RR35TB to Rhino-Rack Heavy-Duty Roof Rack Crossbars you need the Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars part #RR43105. This adapter attaches to the channels…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Dimensions of Channel In Rhino-Rack Heavy Duty Crossbars

Continue Researching