Which Curt Trailer Wiring Harness Fits 2013 Hyundai Accent Hatchback

Question

Question:

Will this part fit a 2013 Hyundai Accent Hatchback? I I don’t see it listed? I already ordered and would need to cancel or return if not.

asked by: Clint

0

Expert Reply:

The correct Curt trailer wiring harness for your 2013 Hyundai Accent Hatchback is the part # C56254 and not the # C56049 as it only fits Sedans.

I put a note in your order notes that you are going to need to cancel and reorder the correct kit.

expert reply by: Jameson C

0

Answer 1

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 2

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 3

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 4

Hey Ken, yes the Replacement Pad for SnapPad Jack Stand Pad System #SP74FR that you referenced is made by Snappad. This is for sure not a knock off! What camper do you have?

view full answer...

Answer 5

Good question, Dave. The easiest way is to match the RVpaws kit to your jack leg or leveling system. For example, there are specific kits for the brands and lineups out there: Standard 2" round jack leg = #RV57FR Standard 2" square jack leg…

view full answer...

Answer 6

Thanks for supporting a local business Christopher! So long as your 2012 Chevrolet Silverado is a 1500 and you need a class IV hitch, the Curt item #14301 is going to be the best option. It has a 2" receiver with a 10,000 lbs towing capacity and…

view full answer...

Answer 7

Hi Hunter, If you're wanting to use the Active Controls ActiveStart Plug-IN Soft Start part #AS44FR so you can run your camper's air conditioner while parked next to a house this part would work perfectly. You can use the 15amp to 30amp…

view full answer...

Answer 8

Hey Rodney, thanks for reaching out. Yes, we do have a soft start that can work with the Cool Cat under bench AC on your 2026 TAB400. The Active Controls ActiveStart soft starts are what I recommend since they are more universal and can be used with…

view full answer...

Answer 9

Hey Mike, yes you can definitely use the SoftStart part #AS44FR with a surge protector. You would want to plug the surge protector in the power source first and then plug the Softstart into the surge protector. This order ensures that the surge…

view full answer...

Answer 10

Hey Kirk! Yes, the Active Controls ActiveStart Plug-In Soft Start for RVs #AS44FR will work correctly with your Winnebago View 24G. Plug it into your 30 amp hookup or generator and you'll be ready to go. If you're using this with a generator,…

view full answer...

Answer 11

Hey Greg! I do recommend adding the Active Controls ActiveStart Plug-In Soft Start #AS44FR to your setup! I do see that the Anker Solix F2600 has a TT-30 outlet and it's rated for 2,400 watts of continuous power with a 2,800-watt surge. Most RV…

view full answer...

Answer 12

Hey KP, welcome to the RV world! This is a great question but Active Controls ActiveStart Plug-In Soft Start for RVs #AS94FR is a simpler install compared to the SoftStart #SSR54FR but it also performs a little simpler as well. It will work to…

view full answer...

Which Curt Trailer Wiring Harness Fits 2013 Hyundai Accent Hatchback

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching