Where is the Carr Hitch Mounted Step Made?

Question

Question:

where is this step made? Amurica?

asked by: Jason S

0

Expert Reply:

I am happy to tell you that the Carr Hitch Mounted Step # CARR183242 is made right here in the United States of America. For more great information on this product please take a look at the pair of videos I've linked for you.

expert reply by: Kyle S

0

Answer 1

You can go ahead and direct the photos to me simply by responding to this email. If you could include any potentially relevant measurements I would appreciate that as well.

view full answer...

Answer 2

Sounds like you have a hitch that is set up for a j-pin style of anti-sway.. The rearmost hole on the hitch opening will be a little bit larger and that is the correct hole to use for the hitch pin of your bike rack. Most anti-rattle devices for bike…

view full answer...

Answer 3

As long as your Honda Ridgeline has the factory 2 inch trailer hitch receiver installed, the Carr Hitch Mounted Step #CARR183252 referenced in your question will work great. This will slide right into the hitch receiver to provide a sturdy step for…

view full answer...

Answer 4

There is one option for a hitch step for your 2 inch hitch that won't extend out much past the bumper, and that's with a hitch step that flips up (and down), from Carr: - Carr Hitch Mounted Step for 2" Trailer Hitches - Black #CARR183252…

view full answer...

Answer 5

I would be happy to help. It sounds like you are looking for the Demco 2-Tang Clevis #DM12676-95 which will fit perfectly in the Curt Channel Style Adjustable Ball Mount #C45900 you have. The clevis bolt is not included but a 1" diameter bolt…

view full answer...

Answer 6

You would indeed need the Thule #853-1251 Universal Change Key to remove the un-damaged lock cylinder from your existing locking knob and install it into the replacement knob. With the cylinder unlocked, insert the change key and wiggle the key. The…

view full answer...

Answer 7

Yes the Demco Recon hitch head part #DM6169 is the correct replacement for the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball #DM8550046 that you referenced.

view full answer...

Answer 8

The Louvered Tailgate Insert #VI-4000 that you referenced will work perfectly to provide a finished look for the Stromberg Carlson 4000 Louvered Tailgate #VG-97-4000 on your 2015 Ford F-350 when you aren't towing. For a tonneau cover that will…

view full answer...

Answer 9

Hey Amanda. So long as your Infiniti QX60 has a 2" receiver, then the Carr Hitch Mounted Step for 2" Trailer Hitches item #CARR183242 will work great. The step has a 5" long x 2-1/2" wide base and folds up when not in use. I…

view full answer...

Answer 10

Hi Gil! Good catch. The Firestone Coil-Rite Air Helper Springs - Rear Axle #F4130 does indeed have 2,000 pounds of capacity, just like the Firestone Coil-Rite Air Bags w/ Easy Mount Compressor and In-Cab Control - Single Path - 2,000 lbs #F66XV. I am…

view full answer...

Answer 11

Hello again Rob; the distance between the mounting holes on the Curt Wall Mount for 2-1/2" Hitch Accessories #C64RV is 4-3/4". What will you be using the mount for?

view full answer...

Where is the Carr Hitch Mounted Step Made?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching