Product Experts Available Now!
Call 1-800-940-8924
Erickson Arched Loading Ramp Set - Center Fold - Steel - 80" Long x 11" Wide - 1,600 lbs
(71 reviews)
Price: $282.69
Erickson
Erickson Arched Loading Ramp Set - Center Fold - Steel - 80" Long x 11" Wide - 1,600 lbs
Part Number: EM07464-2
$282.69
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (71)
- Q & A (0)
- Photos
Erickson ATV Ramps - EM07464-2
- Ramp Set
- 80 Inch Long
- 1600 lbs
- 11 Inch Wide
- Center-Fold
- Erickson
- Arched
- Steel
This pair of arched ramps is great for loading 4-wheeled equipment with low ground clearance. The sturdy steel ramps fold at the center for storage, and they come with safety straps. Each ramp supports 800 lbs for a combined capacity of 1,600 lbs.
Features:
- Ramp set lets you load wheeled equipment into your truck bed or trailer
- Great for ATVs, UTVs, or lawnmowers
- 2 Separate ramps can be spaced the same distance apart as the wheels on your equipment
- Arched design helps prevent bottoming out when loading equipment that sits low to the ground
- Sturdy steel is black powder coated for rust resistance
- Mesh surface is easy to hose clean
- Hinged centers allow ramps to be folded for compact storage
- Carrying handles for easy transport
- Plastic-covered props won't scratch your truck or trailer
- Cam buckle safety straps prevent ramps from sliding out during loading and unloading
- Securely connect ramps to truck or trailer
Specs:
- Quantity: 2 ramps
- Weight capacity: 1,600 lbs (800 lbs per ramp)
- Individual ramp dimensions: 80" long x 11" wide
- Safety strap dimensions: 1" wide x 6' long
- Weight: 60 lbs (30 lbs per ramp)
- 90-Day limited warranty
07464 Erickson Manufacturing Arched Centre-Folding Steel Mesh Loading Ramps - 6.8 Feet Long x 11 Inches Wide - 1600 lbs
Ratings & Reviews
4.7
71 reviews
by:
Roger
12/15/2017
The loading ramps I got from etrailer worked great for loading my Polaris rzr in my pickup fold up great for storage
by:
Ken M
11/15/2016
I purchased an arched set of Erickson cargo loading ramps EM07464-2 80" 1600lb rated. These are great for my purpose of putting a golf cart into my storage shed that is 30" above grade. They carried the weigh without any deflection at all and fold for easy storage, much safer than the wooden planks I was using, you won't be disappointed!!
by:
John
10/21/2018
I bough the ramps so that I could wheel my new 10 horse power snow blower into the basement from my garage, as there are about six steps that go down into the basement from the garage. I have also used the ramp for wheeling other items, namely power washer and lawn mower.
The ramps works fine, they are very sturdy and solidly built. They also have a lip that maintains their position on the step so that they do no "slip away and fall" when they are being used. I will shortly be using the ramps in the reverse order- taking the snowblower up the stairs for the winter, and I do not foresee there being any problem doing that.
The ramps works fine, they are very sturdy and solidly built. They also have a lip that maintains their position on the step so that they do no "slip away and fall" when they are being used. I will shortly be using the ramps in the reverse order- taking the snowblower up the stairs for the winter, and I do not foresee there being any problem doing that.
by:
Jeff V
05/21/2017
Nice and versatile product. I use for moving items into a large shed, and it handles easily snow blower, and the ATV. Delivery after order was prompt and items in good shape.
Jeff V.
5/21/2018
Great, and practical product easy to setup and handles a variety of yard equipment moving in and out of a large shed. This includes, ATV, large snow blower and other items.
by:
Robert
08/30/2025
Outstanding quality steal ramps. Order received on time as scheduled.
A satisfied customer.
A satisfied customer.
by:
Rex
08/02/2018
Ramps are exactly what I wanted. An added extra was they have handles that allows you to conveniently carry them. Ramps were delivered promptly. I am very satisfied with the product and the service.
by:
Joseph B.
04/16/2018
Really great product! Used my hand truck to move heavy items on an off my pickup truck, why did I wait so long to purchase something like this? Easy to set up and break down, folds and stores out of the way. Sturdy enough to drive my lawn tractor or golf cart (used for garden work - not golf) on to the truck.
by:
Frank
12/15/2017
GREAT RAMPS FOR THE PRICE.
I USE THEM AT THE RANCH TO LOAD AND UNLOAD GOLF CART INTO AND OFF MY PICKUP BED.
GLAD I BOUGHT THSE.
I USE THEM AT THE RANCH TO LOAD AND UNLOAD GOLF CART INTO AND OFF MY PICKUP BED.
GLAD I BOUGHT THSE.
by:
John W
08/12/2016
I just received my loading ramps. I have not used them yet however they seem strong and surprisingly very light weight. Well Built.
by:
Doug
05/04/2018
The ramps have worked great. Two minor ideas. Weld the handles on opposite sides so you could put them closer together and straps with a hook on both ends. The ramps make loading the motorcycle a piece of cake.
Doug
5/8/2019
Ramp is doing great!! No problems after more than two years
by:
Dan
12/10/2020
I've been using it to load snowblowers. Works great.
by:
Good
02/13/2020
The bend is too much
Tyler M.
2/17/2020
It sounds like the arch in this ramp is a little too dramatic for your setup. Another option is the Stallion Arched Loading Ramp Set # 288-07432-2. This ramp is 10 longer, allowing them to have a lesser angle which makes it easier to load your vehicle. These ramps are a slightly higher investment, however they do have almost double the loading capacity and are significantly lighter per ramp.
Helpful Links
by:
Brett
09/26/2016
We bought them for ramps to get our large riding mower into the shed.
They certainly work thought they weren't made for this; surprised nobody really does seem to make anything for this; ideally, much more ridged and stiff, not bouncy.
They certainly work thought they weren't made for this; surprised nobody really does seem to make anything for this; ideally, much more ridged and stiff, not bouncy.
by:
Freddy
04/17/2023
These saved me a ton of lifting, used in two moves with a handcart and the moving of a very large snow blower a couple of times! Super easy to use, the folding is perfect to make them easy to deploy and store
by:
David S
09/30/2016
Ramps perform as advertised...use them about once a month and they do the job.
by:
Tyson R.
10/06/2015
Extremely well built loaded my Polaris rzr 800 in the back of the pickup didn't flex or bend at all very impressed for the price!
by:
perry T.
03/30/2015
these are high qulaty ramps..
by:
David H
03/21/2017
very impressed with quality and finish
by:
Doug
11/12/2020
Good ramps
by:
Don D.
08/27/2017
Great ramps. Sturdy and portable which will last for years. I did modify the ramps and glued dense foam to the areas where it made contact with my plastic bumper. Quick and easy modification eliminating scratches to my bumper.
by:
Kilted Tailor
09/20/2017
Readers; Here is a 'non-bot' review of this product. It is used to load either a snow blower or a lawn tractor into my GMC truck to take the item for seasonal work. It works well from the ground to the the truck bed, but it is steep, so caution is suggested when going up/down. In my use, I have a 'ha ha' wall which a one point of it is the exact height as the truck tailgate. Thus, the ramp goes from the upper lawn, out in the open for a foot or three, and into the truck. Perfect! but just for me .The ramps are rugged enough for a large lawn tractor. They have the annoying habit of jamming up; the nuts tighten on their own when the 'joint' is used. The chain must be tethered when you carry it, or it tangles under your feet. it gets in the way when you unfold the ramp, I am looking for strong snap links to make on/off easy. For all the quirks, it is one of the best that I have seen and/or used. The fold feature, for me, is a must. I have to carry them to the repairs shop to unload the machine. The lawn tractor fills the entire truck box, the folded ramps go in the back seat[4 door truck, in this case]. I have, in fine, seen one new pair of non-folding ramps bend in twain when the poor sod DROVE his lawn tractor up the ramps, to get it in the truck. Iso, if you want a good, strong useful, & with good traction, ramps- buy a set~be safe and be happy
Kilted T.
9/20/2018
George Greetings! Here is what I learned of the product and its uses. One, I use it for the snow blower, the lawn tractor, a 1980 Honda Elite, all of which went into the back of my truck. I used it to move a HEAVY Anderson Patio door up some porch stairs & last, used them to move a HEAVY bandsaw on a hand truck up the one step into my work shop. In all cases, the things work well. They are strong enough for the purpose. They have decent traction, tho I may spray them with truck bed liner in a can to make them less slippery. The only negative would be the hinges. As made, they are metal shafts with a nut on the threaded end. For some reasons unknown to this writer, when the ramps are used, at some point the nut jams the hinge mechanism, by tightening it down too much. Then you have to stop, drag out the tool box, find the right sockets, handles, etc. and then loosen the nut. There is if course, the inherent pinch the fingers factor. The safety chains drag on the ground when the ramp is carried, and love to get snagged on door sills, weeds, and the like. I fixed it with some twist ties. A better method would be a plus for the new 2019 model Ericsson ATV Ramps ditto the hinge design. And my thanks to the Company Policy that has such a follow up program for customer purchase. It is a good idea, and I am glad to offer my small insight to the total picture. As Ever
by:
David L
03/02/2018
Absolutely great product. Easy to use. High quality. Incredibly strong. Convenient carrying handles. I use these ramps for loading and unloading my snow blower, hand mower, and pressure washer to the bed of my Ford Ranger. If I had bigger truck bed, the ramps would easily handle my riding mower. I have even used the ramps to get an old steel 4 drawer file cabinet out of my basement...by myself! I can't say enough good things about these ramps. They have my highest recommendation.
David L.
3/3/2019
The ramps are still awesome. I could not be happier with them!
by:
James
10/21/2021
Product has a good appearance however the stamped edges seem a little sharp. Did not cut the skin but could if one is not careful. The top piece that sets to the tail gate seems a bit light. When pressing down just to get a feel for it's strength the ramp slightly deformed at the edges of the top piece. I do not plan to load anything very heavy so they will likely serve my purpose well. I'm not sure I would want to repeatedly load 1000#. The fold up feature is nice and the hinges seem strong.
James
10/22/2022
4 star again. As mentioned before the top end is a little light and could use some reinforcement.
by:
trothaus
06/06/2017
Product was shipped quickly. The ramps are high quality and work very well on our Toyota Tacoma. It was very easy getting our Vespa up on the truck. We have mowers and brush cutters that are a forever being transported here or there. The ramps stay put and make the job much easier.
Trothaus
6/8/2018
They are very handy and holding up well. It was a good purchase.
by:
Marc
08/21/2021
The ramps were bought because I sometimes transport a supermoto bike to track days, in a mid-size pickup. When shopping for the ramps, I was looking for simplicity, strength, portability, and affordability. The Erickson ramps meet all conditions. No help needed in loading a 300-lb bike without help (but I do have to have the bike running in gear b/c of bed height.) Four-star rating is only because, through their own fault, an inattentive user could get their fingers cut during use. Maybe running a sander over the ramp surface could help.
25
71
true
Show More Reviews
See what our Experts say about this Erickson ATV Ramps
- Recommended Ramps for Loading a Snow BlowerSomething like the Erickson folding ramps, part # EM07464-2 would work much better for you, as it would be much easier to push a snow blower up the heavy duty grating that makes up the ramp surface. I really like the way the ramps fold up for easy storage. The ramps feature integrated handles for easy carrying.
view full answer... - What is the Spacing Between the Rungs on the Stallion Loading Ramp Set # 288-07489The rungs on the Stallion Loading Ramp Set # 288-07489 that you referenced have 3" gaps between them as you can see in the attached photo. My contact at Stallion confirmed this. If the spacing is too much for you to use and the 3,000 lbs weight capacity is a bit overkill then I recommend using the Erickson Arched Loading Ramp Set # EM07464-2 instead. These measure 80" long x 11" wide and have a combined weight rating of 1,600 lbs. The mesh surface will not have gaps big enough to cause...
view full answer...
- Compatibility of Erikson Loading Ramps with Flat Trailer DeckThe Erickson steel ramps # EM07435 and the similar aluminum ramps # EM07434 have a bolted-on angled plate at the vehicle end that is designed to lay flat on the top surface of the truck bed when the ramp is extended for loading. Please refer to the linked photo. No special ledge or other surface is required beneath the trailer deck. The ramps do include safety chains to prevent them from shifting as you roll your load up onto them. The maximum weight capacity of the Erickson Arched Loading...
view full answer...
- Fit & Compatibility of Erickson Ramps on a Chevrolet Silverado 2500HD with Bed Height of 39 Inches There is not a height restriction for the Erickson Ramps # EM07464-2. These could work for your truck and golf cart, after doing some calculations, I found that the angle the golf cart would need to climb with the 80 inch Erickson Ramps # EM07464-2, you were looking at, installed on your Chevrolet Silverado 2500HD will be 29.17 degrees. For a less steep 25 degree incline from ground to truck bed, I recommend the 90 inch long Erickson Ramps # EM07486. I have linked both products to this...
view full answer... - Recommended Ramps to Load Electric Scooter on Everthere Sport X300 Cargo CarrierI may have a solution for you, but we don't have anything designed specifically for your Everthere Sport X300 cargo carrier. You could make the Erickson Arched Loading Ramp Set - Center Fold - Steel - 80" Long x 11" Wide - 1,600 lbs # EM07464-2 work for this application, which is a folding ramp set with slip resistant rubber tipped ends, that'll provide you with a secure connection to the cargo basket to load your scooter. These ramps are light weight at 25-lbs each and at 11" wide (for...
view full answer... - Are Erickson Arched Loading Ramp # EM07464 Sold in Pairs or Single RampsErickson Arched Loading Ramp # EM07464 is sold in quantities of 1. The set of 2 is # EM07464-2. Or we have other ramp set options. I have included a link to them for you.
view full answer... - Gauge Steel Used in the Erickson Ramps # EM07464-2I spoke with my contact at Erickson and the Ramps part # EM07464-2 are made of 12 gauge steel.
view full answer... - Steel Ramp That Is 11-Inches Wide To Replace PlywoodWe do offer ramps that are 11-inches wide but the length is quite a lot longer than the 58-inches you said your ramp is. I recommend a ramp like part # EM07464-2. these ramps fold and are 80-inches long and 11-inches wide. As far as the replacement hinge, I recommend a hinge like part # SH200. This is a 2-inch wide continuous hinge. The hinge is 6-ft long so you will need to cut it to the correct length you need.
view full answer... - Thickness of Erickson Ramp Set part # EM07464-2 When FoldedI spoke with my contact at Erickson and they informed me that the width of the Erickson Ramp Set part # EM07464-2 when folded is 5 inches.
view full answer...
- What Do Each of the Ramps of the Erickson Ramps part # EM07464-2 WeighYes, the Erickson Ramps part # EM07464-2 weight 30 lbs apiece. These have an 800 lb capacity per ramp. Check out the review video I attached for more info as well.
view full answer... - Could the Erickson Ramp EM07464-2 Be Used on a Van for Loading Pressure WasherAs long as there is a decent ledge at the rear of your 2003 Chevy Express Van when the rear door is open the ramps part # EM07464-2 that you referenced would not slide or move while pushing up your pressure washer that is on wheels. I attached a picture that shows the brackets of the ramps that will rest on the rear cargo area of your van for you to check out. You will want to open the rear door of your van to see if the ramps would fit. Normally these ramps are used on truck tailgate...
view full answer...
- How Long are the Erickson Arched Loading Ramps When FoldedWhen the Erickson Arched Loading Ramp Set # EM07464-2 is folded up it measures approximately 41.1/2 inches at its longest points.
view full answer... - How Far Out Does the Erickson Arched Loading Ramp Set ExtendAs long as the distance from the first step to the ground is not more than 80" long and your snow blower does not weigh more than 1,600 lbs (unlikely) then the Erickson Arched Loading Ramp Set part # EM07464-2 may work for you. When measuring your steps you will need to measure across the steps not straight out. I have attached a review video of these ramps for you as well.
view full answer... - Recommended Bike Rack for Recumbent E-BikeThe Swagman XC-Extended Platform-Style 2 Recumbent Bike Rack part # S64650-EXT will not meet either the wheel base or weight requirements of your of your bike. It is limited to 35 pounds per bike and a maximum wheelbase of 69 inches. Unfortunately, there are no bike racks for a 1-1/4" hitch that will work with a 70" wheelbase and 57 lbs. Instead, I recommend a small trailer like the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs Item # K2MMT5X7. The bed of...
view full answer...
Do you have a question about this ATV Ramp?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Chris R
Video Edited:
Joshua S
Video Edited:
Jacob T
Installed by:
Alan C
Installed by:
Hayden R
Installed by:
Jacob H
Written by:
Chelsea B
Updated by:
Matthew S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ken M.
11/15/2017
Ramps work great I use them to put my golf cart in my shed about 30” up!