What are the Connections for the Titan BrakeRite II Breakaway Battery Harness?
Updated 01/30/2018 | Published 01/29/2018
Question:
Is the black Insulated terminal the hot/positive + connection to the battery and the blue non-insulated terminal the ground/negative -
asked by: Terry
Expert Reply:
You are correct that on the Breakaway Battery Harness for Titan BrakeRite II Electric-Hydraulic Actuators - Tandem # T4834402 the black wire with the red terminal will attach to the positive connection on the battery while the blue wire with the white terminal is for the negative connection. I've linked the directions to the BrakeRite II actuator for you to take a look at as well.
Product Page this Question was Asked From
Breakaway Battery Harness for Dexter BrakeRite II Electric-Hydraulic Actuators - Tandem - 32"
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Breakaway Parts
- Battery Harness
- Dexter
more information >
Continue Researching
- Q&A: Are There Different Wiring Diagrams for the Titan BrakeRite EHB Electric-Hydraulic Actuator
- Q&A: Seal With Dimensions to Replace 171255UC
- Q&A: Replacement Hub And Rotor Assembly For A 2008 Shorelandr Boat Trailer
- Q&A: Troubleshooting HydraStar Electric Over Hydraulic Actuator Running But Not Pressurizing
- Q&A: Bleeding Brake Lines During Installation of HydraStar Electric Over Hydraulic Actuator HBA16
- Q&A: Can a Trailer Use Both a Brake Actuator and Electric Brakes
- Q&A: Comparing Electric Trailer Brakes to Hydraulic Trailer Brakes