Availability of 15 inch Trailer Wheel that Can Accept a Baby Moon Hub Cover

Question

Question:

Do you have 15inch wheels that we can put our baby moons on?

asked by: Lorendaspain

1

Helpful Expert Reply:

We have the part # AM20514 which is a 15 inch wheel that has a 6 on 5-1/2 inch bolt pattern that can accept a baby moon cover that is 10-1/4 inch in diameter like the part # AM981306.

expert reply by: Jameson C

1

Answer 1

You can determine whether either of our baby moon hubcaps, part #AM90086 or part #AM981306, will fit a wheel by measuring the outer diameter of the inner ring and then the outer diameter of the inner ring with one of the tabs (see attached photo).…

view full answer...

Answer 2

Yes, baby moon hub cap #AM90086 will fit Dexstar Conventional Steel Wheel #AM20514. This particular baby moon fits 13, 14, and 15 inch conventional steel wheels. I have linked a video featuring the baby moon hub cap for you.

view full answer...

Answer 3

there isn't a guide to tell us the size of the hubcaps needed for your 2021 Gulf Stream Vintage Cruiser 19ERD travel trailer, but I do have a few options to choose from below once you've measured your wheel diameter and lug-nut bolt pattern:…

view full answer...

Answer 4

I would be happy to help. For the Dexstar Conventional Steel Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black Powder Coat #AM20514 you ordered the correct baby moon hub caps are the Americana Pointed Top Baby Moon Trailer Wheel Center Cap - Chrome…

view full answer...

Answer 5

The baby moon covers will not fit on the Provider ST205/75R15 that you referenced. Those covers like the part #AM981306 need a conventional wheel like the part #AM20514.

view full answer...

Answer 6

In order to obtain the correct wheel replacement you will need to know your bolt pattern and tire size you prefer. Your pilot hole measurement of 3-9/16 inches you referenced is a good start and I included a link to all the wheels we currently offer.…

view full answer...

Answer 7

We offer four sizes of trailer wheel with the 6-on-5-1/2-inch bolt pattern: 14-1/2-, 15-, 16- and 16-1/2-inch. Some of these do have a pilot hole diameter that matches your, such as Dexstar wheel #AM20514 which measures 15 x 6. This wheel has a pilot…

view full answer...

Answer 8

When choosing a new hub/drum you want to match up a few things, including your wheel size and the set of bearings used in the hub. The bearings in the new hubs have to be the same as those in your current hubs in order for them to fit on your…

view full answer...

Answer 9

There are two different types of trailer hubs that will determine if the pilot hole on a wheel matters or not. First there are hubs that use wheel bolts to secure the wheel to the hub. These are called hub-centric. For this type, the pilot hole has…

view full answer...

Answer 10

We do have a wide variety of 15" trailer wheels that have a 6 on 5-1/2" bolt pattern that I have linked for you to filter through. Most of these have a pilot hole with a diameter that is about 4.25" wide, but then we do have some…

view full answer...

Answer 11

The Dexstar Conventional Steel Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black Powder Coat #AM20514 work with both drum and disc brakes. As long as the disc brake kit on your trailer is designed to fit 15" wheels you will not have a problem…

view full answer...

Answer 12

Yes, the baby moon covers part #AM981306 that you mentioned would fit the Dexstar Conventional wheels part #AM20514 that you have.

view full answer...

Availability of 15 inch Trailer Wheel that Can Accept a Baby Moon Hub Cover

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching