Slipper Spring Recommendation for Continental Jet Ski Trailer
Updated 01/23/2018 | Published 01/22/2018
Question:
Good morning I have a small Continental brand jet ski trailer and need new leaf springs in it they are 25inch from center of front bolt to the end if the cut end, dont remember was called but it slides on one end with no bolt if that makes any sense could you help thank you in advance God bless....
asked by: Manuel A
Helpful Expert Reply:
You have what's called a slipper spring. Which the closest matching spring we have would be the part # SP-178275 which is for a 1,000 lb trailer axle like what a jet ski trailer would normally have and has a length of 24-5/8 inches from the front bolt back to the very end of it.
Product Page this Question was Asked From
3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 1500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 24-5/8 Inch Long
- Standard Grade
- Universal Group
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: sw4b
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Q&A: Determining Which Leaf Springs Fit A Continental AWC11e Trailer
- Shop: Dexter Double Eye Leaf Spring for 2,000-lb Trailer Axles - 20-1/4" Long
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 2K Trailer Axles - 20-3/8" Long - Dacromet
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: 3-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 20-3/8" Long
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Search Results: 3 leaf spring
- Search Results: 3 leaf trailer leaf springs
- Search Results: trailer lights
- Shop: Buyers Products Trailer Hand Winch - 800 lbs
- Video: Erickson Lift Sling for Personal Watercraft Review
- Q&A: Does Trailer Coupler Need to Sit Flat Against the Top of Trailer Tongue
- Q&A: When Installing New Coupler on Trailer Can There Be Gap Above Trailer Frame
- Q&A: Bolt Size Recommended For Channel Style Tongue Trailer Coupler Installation
- Q&A: Do I Need To Remove Trailer Leaf Spring Before Measuring For Replacement?
- Search Results: winch
- Search Results: bow stop
- Q&A: Where Should Rear Hanger Location be for Slipper Springs
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: What Leaf Spring do I Need for My 2015 Karavan Double PWC Trailer Measuring 27"?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Lighting Requirements
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado