Replacement Roof Ladder For Campers, Trailers, and RVs Including 1999 Bigfoot Camper

Question

Question:

Need a replacement ladder for our 1999 Bigfoot camper existing ladder is 89” long with 7 Rungs and 6 pegs in three levels to bolt onto the camper.

asked by: Mark M

0

Expert Reply:

An excellent replacement ladder for most campers is the Stromberg Carlson # LA-401BA Universal and adjustable RV roof ladder. This ladder can be trimmed to match your current sizing. the aluminum construction assures that it will look great for years.

The Surco # SP501L that you referenced would work in the same way if you prefer the bright finish.

expert reply by: Les D

0

Answer 1

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 2

I have a solution for you, but as mentioned in the previous answer a universal replacement ladder like the Stromberg Carlson RV Exterior Ladder #LA-401 may not reach as far forward as the factory ladder on your 2017 Thor Freedom Elite Motorhome. A…

view full answer...

Answer 3

The height of our RV ladders are calculated by measuring from top to bottom. We offer exterior ladders ranging from 84-1/2" to 99-1/2" tall. However, most of them such as the Stromberg Carlson RV Exterior Ladder part #LA-401 are…

view full answer...

Answer 4

I went out to the warehouse to measure the Surco RV ladder #SP502L. The overall height is 84-1/2 inches measured from the very bottom to the very top. Mounting surface to mounting surface is about 76-1/2 inches.

view full answer...

Answer 5

It looks like the closest we have to those measurements is the Replacement Support Arm Assembly for Solera Pitched RV Awnings LC260294 which measures 66 1/8" long. Just to be clear, you will need to measure the wall mount from the top to the…

view full answer...

Answer 6

It is perfectly acceptable to use the B&W Turnover ball Gooseneck hitch #BW77FR, and the #BWGNXA4085 offset ball be used with an Andersen Ultimate 5th wheel Connection. The Andersen hitch adapter provides about 8 inches of offset, plus the 4…

view full answer...

Answer 7

We offer three choices in an exterior roof ladder for your Jayco trailer. These can be seen by clicking on the link provided. We offer both straight and contoured ladders to fit both types of trailer exterior and three choices in ladder height,…

view full answer...

Answer 8

Hey Cristi, It looks like you have a Dometic Blizzard 15k BTU unit on your camper. We do not carry that exact model AC, and as of recently you need the exact same model and part to replace your unit and be compatible with your current system. If you…

view full answer...

Answer 9

Thanks for the pictures of your axles, based on that you do not have the 3 inch high profile bracket so the lift kit part #K71-707-02 would fit. The taller profile bracket is essentially like a taller bracket above the axle that sits up higher almost…

view full answer...

Answer 10

Yes, the DV3300SBL will make a good replacement; cutout dimensions are very close with similar, but not exact wiring connections. The Furrion RV Stereo, #DV3300SBL is a single DIN with HDMI, AUX/USB, Bluetooth, NFC and App Control. Mounting…

view full answer...

Replacement Roof Ladder For Campers, Trailers, and RVs Including 1999 Bigfoot Camper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching