bing tracking image
Customer Service My Orders
  1. Home
  2. Help Videos And Articles
  3. Trailer Leaf Springs Help Hub
  4. Trailer Leaf Springs Q&As
  5. Question 268730
Q & A Icon

Where to Measure to Replace Trailer Leaf Springs if All are Broken  

Published 12/28/2017

Question:

How soon measure the leaf spring if it is completely broke. Note: all 4 leaf springs are broke.

0

Expert Reply:

Can you get me the distance between the hangers of the trailer suspension as well as the capacity of the axle on the trailer? With that we can get you the correct size and capacity spring.

expert reply by:
0
Jameson C
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>
Explore Expert Info Our Expert
on Trailer Leaf Springs

Videos

Help Articles

Expert Answers

Others Also Watched
Measuring To Choose The Right Trailer Axle
Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC53CK
4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
How To Choose Camper Leaf Springs
Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
What to Know About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
Comprehensive Review: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers Review
Installation of the Dexter E-Z Flex Suspension Kit - Enclosed Trailer
Review of the Suspension Kit for Tandem-Axle Trailers
4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles: The Breakdown
An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
Others Also Read
Trailer Wiring Diagrams
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
How to Measure for Trailer Hitch Drop
How to Measure Your Trailer Wheel Bolt Pattern
Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
How to Accurately Measure Trailer Leaf Springs
Trailer Lighting Requirements
Brake Controller Installation: Starting from Scratch
How to Tell the Weight Rating of a Trailer Axle
Double-Eye Trailer Suspension System Review
4 Steps to Choosing Your 5th Wheel Pin Box
Is It Illegal to Leave My Hitch on My Truck?
Others Also Asked
How to Determine Correct Slipper Spring Replacement for 1,500 lb Axle

What happens to slipper springs is that over time they elongate and flatten out, particularly if your springs are considerably older. The most important measurement you mentioned was the 26 inches from the center of the spring eye to the end of the…

view full answer...
Hub, Leaf Spring, and U-Bolt Kit for 2,000 lb Trailer Axle

The Dexter Trailer Axle w/ Idler Hubs #20545I-EZ-72-15 is designed to fit 2,000 lb trailer axles. If that's what you have then this will fit and the U-bolt kit part #APUBR-10 that you referenced would also work since that's what it's…

view full answer...
Is it Ok to Replace Factory Leaf Springs With a Higher Capacity Option?

Though I do tend to warn people about the ride getting stiffer when upping the capacity of their leaf springs, you are correct in that you will technically never be fully "unloaded". I do have to mention that this could still happen, but…

view full answer...
Availability of a Slipper Spring with Radius End and 1,500LB Axle Capacity With a Length of 26"

The only 1-3/4" wide slipper spring we are going to have with a radius end rated for 1,500lbs is the 3-Leaf Slipper Spring #e99SR you found. If you cannot find the correct size you may have to move your Hanger #CE14017G to use these shorter…

view full answer...
How Much Distance Should I Have Between The Tire And The Trailer Frame?

I can certainly point you in the right direction. I will start by saying that our "rule of thumb" is that we want at least 1" of clearance between the tire and the trailer frame. With the hub face currently at 48", you will want…

view full answer...
What Torque Should Be Used For U-Bolt Nuts On Trailer Suspension

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

view full answer...
Can Replacement Shackle Bolt Have Longer Thread Length

I do understand your concern with the potential of a slightly longer thread length on the Shackle Bolt #166081 causing the shackle strap to sit right on the threads. The fact is though that the shackle positioned there as opposed to the unthreaded…

view full answer...
Replacing Slipper Springs With Double-Eye Springs

There are no U-bolts to attach the slipper part, I recommend replacing your slipper springs with double eye springs. In order to do this you need to know the weight rating of your axle as well as the length from center eye to center eye so you can…

view full answer...
What Are the Dimensions of the Spring-Eye Bolt with Locknut for Slipper Springs

The Spring-Eye Bolt with Locknut for Slipper Springs #166079 is a total of 3-3/4" long. The measurement from the back of the head to the start of the threads is 2-3/4" and the length of the threads are 3/4".

view full answer...
Determining Replacement Hubs And Bearings For My 2005 Wesco 128 Trailer

This is an torsion axle on your 2005 Wesco 128. You also think the axles are rated for between 3,000 lbs and 3,500 lbs. Without your specific axle model, I can only speculate which hubs and bearings you need based on the information you provided. For…

view full answer...
How Is the Shackle Bolt with Locknut for Double-Eye Springs 166081 Measured

The length of the Shackle Bolt with Locknut for Double-Eye Springs part #166081 does not include the bolt head, just the shaft. I have attached a photo below.

view full answer...
Correct Track Alignment Replacement Hanger Bolt Recommendation

What you'd want is the replacement suspension bolt part #166079. This is 9/16 inch in diameter like you need and is 3-1/2 inches long too. It comes with matching nut as well.

view full answer...