Correct Track Alignment Replacement Hanger Bolt Recommendation
Updated 12/15/2025 | Published 08/20/2018
Products Featured in This Question
Question:
Do you sell replacement bolts and nuts long enough to go through the Correct Track plates? The bolts are approx 3 1/2” long, 9/16 diameter and with 7/16” threaded end.
asked by: Tim
0
Expert Reply:
What you'd want is the replacement suspension bolt part # 166079. This is 9/16 inch in diameter like you need and is 3-1/2 inches long too. It comes with matching nut as well.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-5/16 Inch Long
- Redline
more information >
Continue Researching
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Search Results: joy rider rv shock kit
- Q&A: How to Determine Correct Slipper Spring Replacement for 1,500 lb Axle
- Shop: 3-Leaf Slipper Spring w/ Radius End for 1,500-lb Trailer Axles - 24-5/8" Long
- Shop: Kenda Loadstar K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range B
- Q&A: What Replacement Hardware do I Need to Use with My Slipper Springs # # SP-161275?
- Search Results: e29sr
- Search Results: tires
- Search Results: galvanized hub kit
- Search Results: 166079
- Video: Breaking Down the 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles
- Video: Checking Out the 3-Leaf Slipper Spring w/ Flat End for 2,900-lb Trailer Axles
- Video: MORryde X-Factor Crossmember for Standard Frame Hangers Feature Review
- Video: MORryde X-Factor Crossmember Adapter Kit for OEM Correct Track Hangers Feature Review
- Video: Review of CE Smith Trailer Suspension Parts - Shackle Bolts - CES25QR
- Q&A: What Are the Dimensions of the Spring-Eye Bolt with Locknut for Slipper Springs
- Search Results: trailer hubs and drums
- Q&A: How to Measure for Replacement Slipper Spring on a Cox Tent Trailer
- Search Results: slipper springs trailer leaf springs
- Video: Feature Review Kenda K371 Bias Trailer Tire
- Video: Ultimate Overview of the CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles
- Q&A: Bolts Needed To Install Slipper Springs
- Q&A: What Torque Should Be Used For U-Bolt Nuts On Trailer Suspension
- Q&A: Replacing Slipper Springs With Double-Eye Springs
Royce L.
12/12/2025
I am looking for the complete spring hanger