Weight of B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRC900

Question

Question:

What is the shipping weight?

asked by: Smokey W

1

Helpful Expert Reply:

The B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRC900 referenced in your question has a shipping weight of 42 pounds.

This heavy-duty underbed hitch has a gross towing weight capacity of 30,000 pounds and a tongue weight capacity of 7,500 pounds. I have attached a short video demonstration on this product that you can also check out.

expert reply by: Chris R

1

Answer 1

The B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 would be a great option for your 2023 GMC Sierra 2500. If you don't already have base rails then you'll want the Curt Custom Fifth Wheel Installation Kit #C16429-204. As for…

view full answer...

Answer 2

Hey Mike. The B&W Patriot 5th Wheel Trailer Hitch item #BW39XR and custom fit 5th wheel rail kit weighs a combined 206lbs. The B&W Patriot 5th Wheel Trailer Hitch item #BWRVK3255 alone weighs 137 lbs. What kind of trailer do you have?

view full answer...

Answer 3

The B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000 lbs #BWRVK3300 is a confirmed fit for your 2017 Ford F-350 with factory rail kit for 5th wheel. This hitch weighs just under 150 lbs. It does come in…

view full answer...

Answer 4

Sounds like you are looking for the formula for determining if you have enough clearance to make 90 degree turns with a fifth wheel trailer hitched up to a truck. The formula you are referring to is this: (A + B) - C = Clearance A = Distance from the…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...