Dimensions of TorkLift GlowStep Stow N Go Mounting Bracket # TLA7810

Question

Question:

What are the actual dimensions to this bracket? A7810 Tork Lift Stow and Go Installation Bracket Making sure i have enough room to mount this under the door of my lance truck camper. Also does this need to be reenforced when installed?

asked by: Teala

0

Expert Reply:

The dimensions of the TorkLift GlowStep Stow N' Go Mounting Bracket # TLA7810 that you referenced is 23 inches wide by 7-1/2 inches tall. It would not need to be reinforced any further than just installing the mount.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the bracket and…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Answer 4

Hi Frank, The In-command system does limit our options for what air conditioners we have that'll work with that system. You can replace your Coleman AC with the Dometic FreshJet 3 RV Air Condition part #DMC94JF and install the Dometic Climate…

view full answer...

Answer 5

I may have different installation method for you, but there is not an extended bracket made to push the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7843 away from your camper to clear your bumper. It may be possible to have a…

view full answer...

Answer 6

Hey Keith, nice 5th wheel! We do have what you need to get power from your vehicle to the Brinkley. The Victron Orion XS #VN93VR is what I recommend. This DC to DC charger will allow you to safely charge your batteries with your 2023 F-350…

view full answer...

Answer 7

The TorkLift GlowStep Stow N' Go Mounting Bracket for Truck Bed Campers #TLA7810 measures 2-1/2" from the bottom mounting hole to the top mounting hole, and 19-1/2" across the two mounting holes. This bracket also has overall…

view full answer...

Answer 8

Hey Marsha! We don't have that fuse but you can use the Replacement 12V Power Cord for Voyager WiSight 2.0 Monitor #VGR56ZR. We have confirmed with Voyager that this is compatible with the WVOM43. What rig are you using the WVOM43 on?

view full answer...

Answer 9

We do have a couple of different options for you from TorkLift. The TorkLift GlowStep Camper Scissor Steps #TLA7806-8000 comes with the landing gear, has a weight capacity of 350 lbs, a mounting bracket height of 49-1/2 inches, and each step is 8…

view full answer...

Answer 10

The TorkLift GlowStep Camper Scissor Steps - 6 Steps - Aluminum - 20" Wide - 300 lbs #TLA7506 are approximately 30 pounds and have a shipping weight of 34 pounds.

view full answer...

Answer 11

Thanks for the picture Brian! I am sorry though the Malone SUP Storage Rack item #MPG384 isn't going to work. Those are designed to be hung on the wall. They're not rated to be bolted to the side of your camper and driven down the highway.…

view full answer...

Answer 12

The dimensions of the TorkLift GlowStep Stow N' Go Mounting Bracket #TLA7810 that you referenced is 23 inches wide by 7-1/2 inches tall. If the plate is partially covered I wouldn't stress too much about it. We've found that it's…

view full answer...

Dimensions of TorkLift GlowStep Stow N Go Mounting Bracket # TLA7810

Product Page this Question was Asked From

Continue Researching