Mounting Atwood RV Carbon Monoxide and Propane Gas Detector

Updated 11/21/2017 | Published 11/20/2017

Question:

Do you have available the trim ring to go along with their CO/LP Gas detector

asked by: Tom R

Expert Reply:

The trim ring is not available, but the Atwood RV Carbon Monoxide and Propane Gas Detector # AT36681 can be mounted quite simply without it. I attached a page from the directions which shows how this is done; you simply remove the bezel from the detector, place the detector in the pre-cut hole and secure it with screws, then snap the bezel back on the detector. The other picture is from a customer showing how the unit looks when installed.

expert reply by: Kyle S