Diameter of Trim Ring for Optronics Trailer Light

Question

Question:

What is the internal diameter of the hole on this A09WB trim ring?

asked by: Dan H

0

Expert Reply:

The inside diameter of the Trim Ring for Optronics UCL09 Series Trailer Utility Lights # A09WB is 2-1/4".

expert reply by: Kyle S

0

Answer 1

The color output of the Gustafson RV Puck Light #277-000344 is warmer and would be considered a soft white. See picture and attached review video for more info on this.

view full answer...

Answer 2

If you are going to install two of the MORryde X-Factor Crossmembers #MR33WR on your tandem axle trailer Alan you would want to install them on the front and rear hangers. You can install a third one if you want on the middle hanger as well for even…

view full answer...

Answer 3

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 7

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 8

Hey Mark, you can use the Advent Air Low Profile RV Air Conditioner System #ADV54QR in place of the fan you have in your 2017 Grand Design 303 RLS but due to changes made in 2025 for RV AC units there would be no way to integrate this into your…

view full answer...

Answer 9

You sure do Greg! Which is why the MORryde X-Factor Crossmember for Standard Frame Hangers item #MR33WR comes with longer suspension bolts. These bolts will replace the ones currently being used on your trailer's spring hangers. The X-Factor…

view full answer...

Answer 10

Hey Curt! I wouldn't get too caught up in the axle spacing for the E-Z Flex Equalizers #K71-655-00. The best thing you can do is measure your existing equalizer. If your measurement from left to right bolt hole on center is 7-3/4" then this…

view full answer...

Answer 11

Hi Kenneth! To replace your Carrier Air V, I recommend using the Furrion Chill HE RV Air Conditioner 15K - Single Zone - White part #FR83TD. The Furrion Chill HE has a built-in start capacitor to give the compressor a boost and start up the AC while…

view full answer...

Answer 12

I would be happy to help you determine if the Road Armor Shock Absorbing Equalizers #LC696740 you were looking at will fit your 2021 Forest River Sabre 36BHQ, but this is not information that we have on hand so you will need to measure your current…

view full answer...

Diameter of Trim Ring for Optronics Trailer Light

Product Page this Question was Asked From

Continue Researching