Master Lock Padlock to Work With Blaylock EZ Lock Trailer Coupler

Question

Question:

Will the Master Lock Hidden Shackle Part # 970DPF work this ball lock?

asked by: Marc

0

Expert Reply:

The Master Lock 970DPF will not work with the Blaylock EZ Lock Trailer Coupler # BLTL-33; instead you would want to use the Master Lock Padlock # ML40D.

expert reply by: Kyle S

0

click to enlarge

Answer 1

We do indeed have replacement key 308 for your Fastway Fortress Universal coupler lock; what you need is the following: - Replacement Tube Keys for Fastway Universal Coupler Lock - Key 308 #FA-KEY-308

view full answer...

Answer 2

The more secure coupler locks we offer are designed for be used when the trailer isn't hitched to the vehicle. They're designed to prevent the coupler from being hitched to a trailer ball, like #FA86-0015-305. With the trailer attached to the…

view full answer...

Answer 3

Hi Susan, Yes, you can get trailer coupler locks keyed alike. For example, if you get the Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers - Key 319 #FA86-0015-319, they will all come with the same key number 319. Or…

view full answer...

Answer 4

Yes, the Replacement Handle Latch for Cam-Door Lock part #158-102 will work with a puck style lock like the Master Lock Stainless Steel Padlock part #ML40D so long as the shackle does not exceed 1/2" diameter. I have attached a photo of this for…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Hey Mike, The #IR29FR lock kit is not compatible to work with the B&W Pintle Hitch that you have. The pin diameters are different sizes and would not fit. The only kit we have that is confirmed to fit the B&W Pintle Hitch is the InfiniteRule…

view full answer...

Answer 7

Hi Richi! The etrailer Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 5 - Pre-Greased #AKIHUB-550-35-EZ-K you asked this question from fits all your specifications. It works with 3,500 pound axles (it uses the standard #L44649 and…

view full answer...

Answer 8

The Bulldog Gooseneck Coupler Head Repair Kit #BD1542S01 is specifically for the #BDGN240200 coupler head. This is the Bulldog GN24 which is the same as the Fulton GN24.

view full answer...

Answer 9

Hello Bob, thanks for reaching out. We have a few option for locks that will fit the Dexter DX7 coupler. For a locking pin I recommend the etrailer Surge Brake Coupler Lock #e98888. This will allow you to lock the coupler to the ball. The picture…

view full answer...

Answer 10

There is indeed a built-in fuse on the Furrion Over the Range RV Convection Microwave part #FMCM15SS, it's located at the upper right hand corner on the back of the unit. Therefore, the unit would need to be removed in order to access the fuse.…

view full answer...

Answer 11

Hey Kevin, The short answer is yes, you can install a front hitch on a 2023 Ford F-150 XLT. However, you will have to remove the auto deploying air dam and do some minor fascia trimming to install one. Other than that, it's a simple bolt-on…

view full answer...

Answer 12

To determine whether or not the B&W Tow & Stow 2-Ball Mount #BWTS20037B will work properly on your 2022 GMC Sierra 2500HD with the Rock Tamers #ERT00110 you will need to measure from the center of your hitch pin hole to the face of the hitch…

view full answer...

Master Lock Padlock to Work With Blaylock EZ Lock Trailer Coupler

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching