Availability of Replacement Equalizer that has EQ-310 on it
Updated 10/31/2017 | Published 10/30/2017 >
Question:
I need a new equalizer kit for my boat trailer. The equalizer says EQ 310 on it. Can you help me with what parts I need? I would like to replace equalizers, bolts, and shackles.
asked by: Tim G
Expert Reply:
If you are looking to replace your current EQ-310 equalizers with the same thing then we have that equalizer listed on our site as part # TREQ310.
Then to replace your shackle straps you can simply filter through our linked selection of shackle straps for the appropriate length for your application.
I have also linked our selection of suspension bolts that you can filter through for the correct diameter and length of bolts needed.
I do recommend going with the Never Fail Bushings, like part # LC279685, as you will never have grease your bolts again. Grease will actually cause these bushings to wear out so you will want to make sure everything is grease-free before installing them. These will fit perfectly in the EQ-310 equalizer.
If you are wanting to upgrade your suspension then you will need to reconfigure your suspension setup on your trailer as none of our equalizers have the same dimensions of the EQ-310. I am also linking our selection of equalizers upgrades for you to filter through.
Product Page this Question was Asked From
Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 6-1/16 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: axle spacer
- Search Results: 92 inch hub face trailer axles
- Q&A: Replacement for 3,500 lb Axle With 92-1/2 Inch Hub Face Measurement
- Shop: Trailer Idler Axle Beam with Easy Grease Spindles - 72" Long - 2,000 lbs
- Video: All About the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 5-7/16" Center
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Q&A: Availability Of Suspension Hanger Bracket With Mounting Holes Near 3 On Center
- Q&A: Can A Taller Equalizer Be Installed To Gain Extra Height
- Q&A: Bolt Hole Dimensions for CE Smith Front/Rear Hanger Bracket for Double-Eye Springs
- Video: What to Know About the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs
- Video: Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs: The Breakdown
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Q&A: Troubleshooting Tandem Axle Trailer Leaf Springs Hitting Trailer Frame at Equalizers
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 3-1/8" Links
- Shop: 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Shop: CE Smith Front/Rear Hanger Bracket for Double-Eye Springs - Galvanized Steel - Bolt On
- Shop: Triangular Equalizer for 1-3/4" Double-Eye Springs - 6" Long - 9/16" Center Hole
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: trailer tires and wheels
- Video: How To Choose Camper Leaf Springs
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Search Results: trailer wiring
- Video: Hands-On with the Hub Saver Hub and Wheel Protector

