Will the Ground Clearance of the Draw-Tite # 75992 on a 2011 Ford Edge be an Issue When Towing
Updated 10/24/2017 | Published 10/23/2017
Question:
2011 ford edge Limited FWD. I believe every Ford Edge that I have seen with a trailer hitch had the facia cut out. Is that difference in height between the P/N 75992 and the others going to be an issue when I rent or buy a trailer?
asked by: Tim R
Helpful Expert Reply:
You should have no issues being able to tow a trailer behind your 2011 Ford Edge Limited after installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75992. You will simply need to find a ball mount that has the correct rise or drop to ensure that it is level. When we installed this trailer hitch on a similar 2011 Edge (see attached video) we found from the ground to the top of the inside of the hitch receiver was about 13-1/2 inches. You can use this measurement and the attached ball mount article to help you choose the appropriate ball mount from our selection that I have linked for you.
If you will be towing a few different trailer then what you may find helpful is using an adjustable ball mount like part # 63070 which can be adjustable for a 4-3/4" drop all the way to a 5-11/16" rise.
If you don't already have wiring for your trailer on your 2011 Edge then I also recommend installing the Tekonsha T-One # 118515 which will give you a 4-Way connector at the rear of your Ford Edge to activate the lights on your trailer. An installation video for this product has been linked for you to review as well.
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Curt ShockDrop Technology Manufacturer Spotlight
- Q&A: Can The Shank Of the Blue Ox Adjustable Ball Mount BLU84HR Be trimmed?
- Search Results: weigh safe aero
- Search Results: pintle plate
- Shop: Weigh Safe Pintle Hitch w/ Built-In Scale w/ Balls for 2" Hitch - 6" Drop - 15K - Steel
- Search Results: trailer hitch ball mount
- Search Results: curt rebellion xd
- Shop: Gen-Y Phantom Hitch Ball Mount - 2" Hitch - 5K - 4.5" Drop
- Shop: Weigh Safe Pintle Hitch w/ Built-In Scale w/ Balls for 2.5" Hitch - 6" Drop - 22K - Steel
- Shop: Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 10-3/4" Shank - 8 Hole - 20,000 lbs
- Shop: Curt Pintle Hook Mounting Plate for 2" Hitches - 6" Shank - 8 Hole - 17,000 lbs
- Shop: Gen-Y Phantom X Adjustable Ball Mount - 2" Hitch - 4-1/2" Drop -10K
- Shop: B&W Pintle Hook Mounting Plate for 2-1/2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
- Q&A: What Does the Pro Series Adjustable Pintle Hook Mounting Plate Part # 63072 Come With
- Q&A: Can One Ball of the TowSmart Adjustable Tri-Ball Mount # TS74VR be Used at a Time
- Q&A: Is There Adjustable Ball Mount with Two Balls that Has 1-7/8 inch Hitch Ball
- Search Results: bulletproof hitches trailer hitch ball mount
- Search Results: ball mount
- Search Results: weigh safe wheel chocks
- Q&A: 2001 Ford F-150 Trailer Hitch Needed with a 700 lbs Tongue Weight and Fits with Spare Tire
- Q&A: Recommended 3-Ball Tow and Stow Compatible with Custom Bumper
- Q&A: Adjustable Ball Mount with 2 inch Hitch Ball that has 10k Capacity
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: How to Choose a Trailer Brake Controller
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
on Trailer Hitch
