Replacement Wheel Strap for the Yakima FrontLoader

Question

Question:

Hello I have bike rack # Y02103 The strap that holds the rear tire snug has broke off. Do you sell replacement parts for that? It is the plastic strap with the teeth on it.

asked by: Andy H

0

Expert Reply:

To replace the wheel strap on the Yakima FrontLoader, part # Y02103, you'll need part # Y8880229.

expert reply by: Jacob W

0

Answer 1

The Replacement Extra Long Wheel Strap for Yakima Frontloader and HoldUp, #Y8880229, measures 12-1/4 inches long. I recommend taking a quick measurement of your tire to compare the two. Please keep in mind that this strap was designed to fit the…

view full answer...

Answer 2

The Yakima Fat Tire Straps #Y02470 that fit the TwoTimer and Four Timer hitch-mount platform bike racks will not work on their HoldUp carriers. I confirmed this with my contact at Yakima. The Hold-Up carrier cannot be retro-fitted with larger straps…

view full answer...

Answer 3

Hey Stan, thanks for reaching out! Here are the inside dimensions of the roof box you're asking about, as well as a linked photo of the roof box comparison chart from the Thule website that you can reference: - Thule Force 3 M #TH47SA -…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part #Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter…

view full answer...

Answer 7

You really could use either one of the 68" #Y01158 or 78" #Y01159 bars, but I have a feeling that the 78" bars are going to stick out a little bit too far, so I do recommend going with the 68" Yakima HD Bars #Y01158. Obviously…

view full answer...

Answer 8

That’s a great question Chadwick, and this is one of those situations where the change in technology really matters. The GE Appliances Low-Profile RV AC w/ Heat Pump part #GE26RR will replace your current ARC13AACBL2 setup, but it’s important to know…

view full answer...

Answer 9

There's no issue with that at all Charles! It'll actually be easier to do this all at once. The Yakima Same Key System item #Y07208 comes with eight replacement/new lock cores, two keys, and a control key. You can purchase as many of these as…

view full answer...

Answer 10

Hey Michael! To add Yakima HD Crossbars like #Y01158 to the TrackTowers #Y52AV you need the HD Bar Adapter for Yakima Streamline Towers #Y03541. Are you adding crossbars to a camper shell?

view full answer...

Answer 11

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 12

The correct Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers that you will want to use on a mid-size truck like your Toyota Tacoma is part #RRVA165B-RRRLT600 which has 65" long crossbars. The part…

view full answer...

Replacement Wheel Strap for the Yakima FrontLoader

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching