Adjustable Ball Mount with 1-7/8 and 2 Inch Balls

Question

Question:

regarding the adjustable hitch do you have one with 1 7/8-2inch ball combo?

asked by: CARLOS P

0

Expert Reply:

We do have some adjustable ball mounts that feature a 1-7/8 inch and 2 inch ball. We have Rapid Hitch # AM3411.

We also have some with 3 balls (1-7/8, 2, and 2-5/16 inch) including # D900 and # 3371802225. I have included some links to videos for you.

expert reply by: Michael H

0

Answer 1

The U-Haul 5x8 Cargo Trailer has a suggested coupler height of 18". Therefore, you'll want to take this measurement and subtract this from the distance from the ground to the top inside edge of the receiver on the vehicle. The difference…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Mark! Thanks for your continued business. We appreciate it. :) We get questions like this a lot as it's hard to tell sometimes if you have LED or halogen / incandescent tail lights. If you look at the taillight housing and see bulbs through…

view full answer...

Answer 7

To install a 7-Way harness on your 2023 Ford Bronco without the towing package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle…

view full answer...

Answer 8

Hey Jay, the Thule Motion 3 Rooftop Cargo Box #TH77PN that you referenced is designed to fit OEM crossbars so it would fit the OEM bars of both your 2016 Subaru Outback and your 2023 Toyota RAV4 TRD so this would be a great option for you. Are you…

view full answer...

Answer 9

Hi Ryan; the Weigh Safe Hitch w/ Built-In Scale for 2.5" Hitch #WS56ZR is designed in the US but manufactured in China. The Weigh Safe ball mounts with the built-in scale are pretty unique so we don't have a USA made option with the same…

view full answer...

Answer 10

Hey Rick, the Redarc Tow Pro Link part #RED57AR will easily replace your ITBC in your 2014 Ford F-350 and it will work great. Now with that said usually weak trailer brakes are not the fault of the brake controller and instead it's wiring to the…

view full answer...

Answer 11

Hey Jake, congratulations on the new Bronco! I can definitely help you get everything together. For a complete flat tow setup on your 2027 Ford Bronco I recommend the following: -Curt Custom Base Plate Kit #C83ZV (with factory D-rings) -Curt Custom…

view full answer...

Answer 12

Hey Brian. Sorry but there are no plug in wiring harnesses for flat towing your 2024 Ford Bronco Outer Banks. You'll need the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item #RM38FR. This wiring kit…

view full answer...

Adjustable Ball Mount with 1-7/8 and 2 Inch Balls

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching