Suspension Enhancement Recommendation for 2017 Ram 3500 to Help with Sway from In Bed Camper

Question

Question:

control rocking and sway on cab over camper mostly over bumps 2017 truck ram 3500 hd short bed 4x4 no overlad springs bed payload 3960lb camper northern lite basement model 811inch queen classes SE weight 2600lb dry i bought and installed from e trailer torklift frame mount camper brackets ft and rear rest of suspension is stock no air bags overlaps etc thank you

asked by: Roy L

0

Expert Reply:

For rocking and sway reduction the best suspension enhancement kit we have for your 2017 Ram 3500 is the SuperSprings Suspension Stabilizer part # SSA15MTKT. This kit will provide you with additional suspension support and has the reputation as the best for reducing sway like what you are experiencing as well.

expert reply by: Jameson C

0

Answer 1

Both the SuperSprings #SSA10MTKT and #SSA15MTKT have mounting shackles that have a series of 3 holes at different heights. If you use the lowest set of holes, the unloaded truck will remain at its current ride height. The next level of holes will…

view full answer...

Answer 2

The Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle #AL57595 is a confirmed fit for your 2014 Ram 3500 and will fit with the SuperSprings Suspension Stabilizer and Sway Control Kit - OEM Leaf Springs Above Axle #SSA15MTKT in place because…

view full answer...

Answer 3

You would benefit from some suspension enhancement on your 2004 Dodge Ram and in-bed camper. However, you would not need 2 separate systems. One would be sufficient. Since a camper is pretty much a static load (does not vary greatly in size or shape)…

view full answer...

Answer 4

Any suspension enhancement kit that bolts to the inside or outside of the frame or has brackets that touch the inside or outside of the frame could possibly cause interference with the 5th wheel brackets already installed on your truck. This includes…

view full answer...

Answer 5

The SuperSprings Suspension Stabilizer and Sway Control Kit part #SSA15MTKT as you mentioned have a 2,600 lb weight capacity. If the pin weight of your trailer is 2,000 lbs then you will fine. These are going to offer far more support for your…

view full answer...

Answer 6

According to SuperSprings, the #SSA15MTKT kit isn't a fit for chassis/cab models, it'll only fit the pickup. For your chassis cab, you'll want to use #SSA23 along with the #MTKT (assuming that your leaf springs are mounted above the…

view full answer...

Answer 7

The Super Springs kit part #SSA15MTKT is exactly what you'd want as it will give you the support you are needing and will lift the rear suspension to eliminate the sag you are experiencing. When unloaded it will add almost an inch to the rear…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Suspension Enhancement Recommendation for 2017 Ram 3500 to Help with Sway from In Bed Camper

Product Page this Question was Asked From

Continue Researching