Clip that Holds Trailer Brake Magnet to Assembly
Updated 09/12/2017 | Published 09/11/2017
Products Featured in This Question
Question:
Hi, I bought a used trailer and the brakes are rusty. While disassembling components, the brake actuating level with magnet came off its pivot point. The parts diagram shows that it is removable. What holds it place?
asked by: Tom N
0
Expert Reply:
Typically the brake magnet of an assembly is held on with clips like the part # BP19-001. If you have the part # 23-27 then what you'd need is the # BP19-001.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Shop: Replacement Magnet Retaining Clips for 10" and 12" Electric Trailer Brakes - Qty 10
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Video: etrailer Trailer Brakes AKBRKR-MC Review
- Video: A Closer Look at the Magnet Retainer Clip for Oval Magnet
- Shop: Magnet Retainer Clip for Oval Magnet
- Q&A: Replacement Brake Assemblies for Dexter 10k Trailer Axle
- Q&A: Installing the Magnet Retainer Clip on a 10K Electric Brake
- Article: Most Popular Wheel Bearings
- Shop: Grease Seals 10-36 (pair)
- Video: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles: The Breakdown
- Video: etrailer Easy Grease Trailer Hub and Drum Assembly Installation - 2019 Grand Design Reflection 150 F
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Installing Castle Nut in Hub and Drum Assembly
- Q&A: Torque for 7,000 lb, 12 Inch x 2 Inch Dexter Electric Brakes
- Q&A: Torque Spec for Tightening Trailer Brake Assemblies to Trailer Spindle
- Q&A: What Causes a Brake Magnet To Fall Off After Removing the Hub
- Q&A: What are the Torque Specs for Installing 12 Inch Electric Brake Assemblies
- Search Results: magnet clips
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Article: Where to Position the Trailer Axle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Dexter Trailer Hub and Drum Assembly - 7K E-Z Lube Axle - 8 on 6-1/2 - Pre-Greased - 1/2" Stud
- Video: Feature Review Replacement Nut Retainer for 6-191 Jam Nut
- Video: etrailer Electric Trailer Brakes Review
- Search Results: spring bushings
- Search Results: trailer brakes
- Shop: Trailer Hitch
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Trailer Wiring