Bearing Sizes for Calkins Trailer Model Z-14-600 with a 4 Lug Wheel Bolt Pattern
Updated 08/17/2017 | Published 08/15/2017
Question:
I need a bearing kit for Calkins trailer... which one is for model: Z-14-600 4 bolt hub Thank you!
asked by: David
Expert Reply:
I spoke with the manufacturer, who informed me that they are unable to offer specific bearing numbers based on your trailer model number.
The best way to determine your bearing sizes is to measure them. To do this, you will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the spindle nut, remove the spindle nut, and then remove the hub from your trailer.
Once the hub is removed you will be able to get the part numbers from the inner and outer bearing numbers to determine the correct bearing kit for your trailer.
I have attached a photo showing where the part numbers are located and the areas that you will need to measure if your parts do not have part numbers etched on them.
If you would like to send me the bearing numbers or measurements you find, I will be happy to recommend the correct bearing kit for you. I've also attached an article on popular trailer wheel bearings for you to check out.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: calkins trailer parts
- Search Results: trailer hub
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Search Results: trailer tires and wheels
- Search Results: wheel seals
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Search Results: 44649
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 - Load Range B
- Shop: CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K
- Shop: Replacement Bearing Buddy Bras - Model 19B - (Pair)
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Video: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles Review
- Search Results: trailer hubs and drums
- Q&A: Replacement Hub Assembly for 1987 Calkin Boat Trailer
- Q&A: Replacement Idler Hubs For a 1990's Calkins Boat Trailer With 45264 Idler Hubs
- Search Results: btr spindle
- Q&A: Depth of the Trailer Idler Hub Assembly # AKIHUB-440-2-2K
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Bearing Kit for Lippert 4,400 lb Trailer Axle
- Q&A: Replacement Bearing And Seals For UFP Hub H-1062-2
- Article: How to Bleed Your Trailer Surge Brakes