Depth of the Trailer Idler Hub Assembly # AKIHUB-440-2-2K
Updated 05/25/2018 | Published 05/24/2018
Question:
Is this hub what is called a short hub ?
asked by: James
0
Expert Reply:
I am not sure what you mean by "short hub" but I went out to the warehouse and found that the Trailer Idler Hub Assembly # AKIHUB-440-2-2K you referenced has a total depth of 4-1/4" as you can see in the attached picture.
expert reply by:
Jon G
0
click to enlarge
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Video: All About the Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel
- Video: Breaking Down the Dexstar Steel Spoke Trailer Wheel
- Video: The Low-Down on the Trailer Idler Hub Assembly for 2,000-lb Axles
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Shop: Dexstar Steel Spoke Trailer Wheel - 13" x 4-1/2" Rim - 4 on 4 - White Powder Coat
- Shop: Loadstar ST175/80D13 Bias Trailer Tire with 13" White Wheel - 4 on 4 - Load Range C
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased - Threaded
- Q&A: Replacement Idler Hub that Takes L44649 Inner and Outer Bearings and Has a 4 on 4 Bolt Pattern
- Q&A: Why Are Wheel Pilot Hole Measurements Taken in Decimals and Not Fractions.
- Q&A: Importance of Trailer Wheel Pilot Hole Diameter
- Q&A: Diameter of Trailer Idler Hub Assembly for 2,000 lb Axles
- Q&A: What is the Pilot Diameter on a Wheel
- Q&A: 13 inch Trailer Tire and Wheel Combos with 4 on 4 Bolt Pattern and 2.8 inch Pilot Hole
- Q&A: Trailer Hub Recommendation for Hub on Trailer with 1-1/16" Spindle Diameter
- Search Results: calkins trailer parts
- Search Results: bearing l44649
- Search Results: btr spindle
- Search Results: ptw83020
- Search Results: trailer bearings races seals caps
- Search Results: bearing kit l44649
- Search Results: idler hubs
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration