Replacement Hub Assembly for 1987 Calkin Boat Trailer
Published 03/15/2022
Products Featured in This Question
Question:
For a 1987 Calkin boat trailer. Need 2 whole hub assemblies for 4 lug 4. The spindle is 1.06 but the seal OD is 1.25 NOT 1.5. Neither BT8 or BT9 fits because of the mismatch between the spindle 1.06 which would be BT9 and the seal 1.25 which would be BT8. Is there a part that can allow me to fit this situation maybe a grease seal set that fits over 1.06 axle and seats against the 1.25 seal?
asked by: Steve R
Helpful Expert Reply:
It sounds like you currently have # L44649 bearings with an inner diameter of 1.063" and a grease seal like the # 34823 with an inner diameter of 1.249". For a hub that matches these, along with the 4 on 4 bolt pattern, we have the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased # CE13109.
This hub has a weight capacity of 1,350 lbs (for 2,700 lb axles) and fits wheels up to 12" in diameter. It is pre-greased with heavy-duty marine-grade lubricant so it is ideal for your 1987 Calkin boat trailer.
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2700 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: calkins trailer parts
- Search Results: calkins boat trailer
- Video: Complete Breakdown of the CE Smith Carpeted Bunk Boards for Boat Trailers
- Search Results: trailer jack foot
- Shop: Buyers Products Trimmer Rack for Landscape Trailers - Fits 3 Trimmers
- Video: Comprehensive Review: CE Smith U-Bolts
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Q&A: Is There a Way to Get 9 Foot Carpeted Bunk Board For Boat Trailer
- Shop: Tie Down Marine Slides for Boat Trailer Bunks - Fits Two 8' Long 2x6 Bunks - Black
- Shop: CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 8"
- Shop: A-Frame Trailer Jack - Topwind - 2,000 lbs. by Dutton-Lainson
- Search Results: trailer hubs and drums
- Video: All About the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Q&A: Replacement Leaf Spring Hangers For Escort/Calkins Tandem Axle Trailer With Offset
- Q&A: Will CE Smith Swivel Bunk Brackets Replace Rusted Ones on Calkins Tandem Trailer
- Q&A: Recommended Bunk Boards and Brackets for Boat Trailer
- Q&A: Replacement Keel Rollers for 1998 Calkins Boat Trailer
- Video: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles Review
- Search Results: idler hubs
- Search Results: rv bearing
- Search Results: hub kits
- Q&A: Is There Bearing Buddy that is Slightly Smaller that Size for 1.98 inch Hub Bore
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: An In-Depth Look at the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Video: A Closer Look at the Easy Grease Trailer Idler Hub Assembly for 2K Axles
- Video: Dexter Trailer Axle w/ Idler Hubs Spec Review