Does Curt Hitch C11312 Fit 2008 Ford Mustang GT

Question

Question:

What modification are required for a hitch to fit a GT Mustang? It couldnt be TOO different could it?

asked by: Brian W

1

Helpful Expert Reply:

For your 2008 Ford Mustang GT the Curt hitch part # C11312 is a fit for the standard V6 GT models. The only ones it can't fit are the specialty GT models like the GT/CS "California Special", Shelby GT, and GT500.

expert reply by: Jameson C

1

Murray

4/24/2026

If one changed the duel exhaust on a 2007 mustang v8 GT to a custom smaller duel exhaust would that allow the install of the c11312 hitch ?

Jameson C.

4/27/2026

@Murray It's possible but it's not something that was tested so I can't verify.

Answer 1

First, if you go through our fit guide for a specific year, make, and model vehicle, if you do not also select a specific trim level (if available) from the drop down menu it will show you all the hitches for all the trim levels. Some fit multiple…

view full answer...

Answer 2

The Curt hitch part #C11312 that you referenced fits the 2005 Mustang GT Convertible V6's but not the 8 cylinder with dual exhaust that you have. We do not currently have a hitch for the V8 Mustangs. If you are wanting to carry bikes, you could…

view full answer...

Answer 3

Yes, the Curt hitch part #C11312 that you referenced is a confirmed fit for your 2008 Ford Mustang GT Convertible if it is the V6 model. My dad actually has the same exact car as yours (his is blue) and he has this hitch installed and it works well.

view full answer...

Answer 4

If your 2020 Hyundai Elantra is a GT Hatchback, the DrawTite Hitch #24905 will fit as long as it is not one of the models that was mad IN Korea. If your 2020 Hyundai Elantra is a GT Hatchback, but is not an N line model and does not have dual…

view full answer...

Answer 5

Hello Robert, thanks for reaching out. We can provide all the parts you need to flat tow your 2025 Ford Ranger. Here is what I recommend: - Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM23DQ - etrailer SD Non-Binding Tow Bar for…

view full answer...

Answer 6

Yes, the 2018 Hyundai Elantra GT does indeed require different hitches than the sedan version. We do have them separated out in our fit guide to avoid confusion. The hitch I recommend is #C11509. This hitch is a confirmed fit for your GT as long as…

view full answer...

Answer 7

2024 models of the Chevy Equinox have the same steps listed as the 2023 models to get the vehicle ready to flat tow: 1. Position the vehicle to be towed and secure it to the towing vehicle. 2. Start the vehicle. 3. If equipped with AWD, engage the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Does Curt Hitch C11312 Fit 2008 Ford Mustang GT

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching