Replacement Hubs and U-Bolt Kit for 3,500 Pound Lippert Axle # LC35212150

Question:

I have a LCI axle which has a broken hub and looking for a replacement. In addition I need new u bolts and lower spring plate. The axle info is as follows: LC35212150 NV# 212150 FBA-LCI35-SB-64-NOSS-L The bolt pattern is 5 x 5 Any help would be appreciated

1

Helpful Expert Reply:

From my research your axle is a 3,500 pound, 2-3/8 inch diameter axle and since you have a 5 on 5 bolt pattern you likely have bearings # L44649 and # L68149. You'll want to verify this is correct with your current bearings.

If this is the case for a hub and drum assembly I recommend # AKHD-550-35-EZ-K which is for E-Z Lube axles with a zerk fitting. If you have standard axles use # AKHD-550-35-K instead.

If you only need idler hubs use # AKIHUB-550-35-EZ-K with E-Z Lube axles and # AKIHUB-550-35-K with standard axles.

All the hubs have a 5 on 5 bolt pattern and are for 3,500 pound axles.

For the u-bolts and plates you'll need U-Bolt Kit # APUBR-1.

helpful expert reply by:
1
Charles S

Ask The Experts a Question >>


Products Referenced in This Question







Product Page this Question was Asked From


Similar Expert Q&A Pages

See More Q&A Expert Answers >>