No Blue Brake Output Wire at Back of 2002 Chevy Silverado 1500 to Install a 7-Way Connector

Published 07/14/2017

Products Featured in This Question

Hopkins Vehicle Wiring Harness with 7-Way RV-Style Connector

(7)

$32.19

Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot

(323)

$3.60

Pollak Circuit Breaker - Cycling/Automatic Reset - 40 Amp - Straight Mount Bracket

(49)

$7.40

Question:

I installed this on my 2002 chevy silverado 1500 today , I got the white, brown, yellow, green, and red wires connected to the right wires on the trucks wiring harness, but I dont know where to connect the blue electric brake wire to as well as the black wire ? the only wire I have left on my trucks wiring harness is a light blue wire that says it is a chmsl wire

asked by: Ryan

Expert Reply:

It is entirely possible that the blue brake output wire is not run from under the hood to the back of your 2002 Chevy Silverado. This was a common issue even on models that came with a factory tow package.

Check under the hood between the fuse panel and the truck body for a blue wire that has a plug on it. You will need to run a wire from that blue wire to the back of the truck. I recommend using about 25 feet of wire # 10-2-1, sold by the foot. When routing the wire be sure to avoid anything that may pinch or burn the wire such as suspension and exhaust/engine parts.

For the black wire it must be the 12 volt hot lead that is missing. You would use the second wire that is in the 10-2-1 bundle. One end will connect to the positive battery terminal via a 40 amp circuit breaker # PK54540 and the other end will get routed back to the trailer connector and attach to that black wire.

I have linked a help article that, in part, covers this.

expert reply by: Michael H