Is The Bestop Supertop Collapsible Bed Cover # B76302 Waterproof

Question

Question:

Is this product waterproof

asked by: Tim

0

Expert Reply:

I contacted our representative at Bestop to inquire about the Supertop Collapsible Bed Cover, part # B76302. The representative informed me that part # B76302 is weather resistant but is not waterproof. For an item to be waterproof it must be able to keep water sealed out when submersed under water. The material of part # B76302 will resist rain, but there is a chance that water can get in from the seams or zippers of the cover.

Also, if the cover is stretched too much from water puddling up, water could potentially leak in through the fabric. This situation would happen if a large amount of water pooled on the cover and stretched it out.

The representative at Bestop informed me that to further prevent water from leaking in if the cover were to be stretched, that you could apply scotch guard on the inside of the cover.

For the most part though, the Bestop Supertop Collapsible Bed Cover will keep the items in your truck bed dry. There is just the chance that some water will get in through the seams around the windows and where the zippers are.

expert reply by: Reno H

0

Answer 1

The difference between the #B76302 and the #B76307 is the vehicles they fit. The #B76302 fits the following: 1994 - 2006 Mazda B Series Pickup 6 Foot Bed 2004 - 2012 GMC Canyon 6 Foot Bed 2004 - 2012 Chevrolet Colorado 6 Foot Bed 1983 - 1992 Ford…

view full answer...

Answer 2

The Supertop for your 2006 Ranger is only offered in black. The zip-in vinyl windows are included, there used to be a mesh option that is no longer available at this point. According to the instructions from Bestop, the following tools are required…

view full answer...

Answer 3

I'm assuming this didn't have the factory tow package or any existing wiring already. The T-One Vehicle Wiring Harness #118786 you were looking at will add a 4-way and then from there you will upgrade it to a 7-way using the #ETBC7.

view full answer...

Answer 4

To upgrade your 2002 Toyota Sequoia to a 7-Way RV style connector you will need to add a 4-Way to 7-Way adapter, like the Adapter 4 Pole to 7 Pole and 4 Pole, item #37185. There is a 4-Way connector on the back of the adapter that you plug your…

view full answer...

Answer 5

Since you already have the hitch and the 7-way you're set. The Demco Air Force One #SM99243 and #DM26VR (with wireless monitor) come with the parts needed for the RV side as well as the vehicle side. Assuming it has air brakes this is the best…

view full answer...

Answer 6

Hi Jim, The BAKFlip F1 Hard Tonneau Cover #BAK37FR is a confirmed fit for a 2024 GMC Sierra 3500 with an 8' bed and is a quad-fold (4-panel) cover.

view full answer...

Answer 7

The BAKFlip F1 Hard Tonneau Cover #BAK37FR will stick out into the bed approximately 23" when folded to just the first of the four panels. I wasn't able to get an exact dimension for the thickness but was told the panels are about 3/4"…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Rik, thanks for reaching out. The first thing I’d check is that each clamp is fully engaged and sitting flush against the underside of the Ranger’s bed rail. The Fas-Top side rails need to be seated firmly against the bed before the clamps are…

view full answer...

Is The Bestop Supertop Collapsible Bed Cover # B76302 Waterproof

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching