Does etrailer Trailer Hitch for 2017 Toyota RAV4 Interfere with Hands Free Lift Gate

Question

Question:

Hitch for 2017 RAV4 Hybrid Limited. For item # 75235 tech tip states: Hitch may interfere with the Hands-free Liftgate sensors and functionality may be very limited or possibly lost. Can you please confirm if this is a concern for 2017 model as we dont wanna lose liftgate functionality or if you have another hitch that does not have this issue?

asked by: Jim

0

Expert Reply:

For the etrailer Hitch part # e98864 that you referenced it's going to block a portion of the sensor but what you can do is kick your foot to either side of the hitch tube and the liftgate will open like normal.

I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

0

Answer 1

If you don't like the etrailer Trailer Hitch Receiver part #e98864 because of the visible crosstube then check out the EcoHitch Hidden Trailer Hitch Receiver part #306-X7219 which has a concealed crosstube that provides a much cleaner look and…

view full answer...

Answer 2

We have a similar hitch to the EcoHitch part #306-X7219 that you referenced that does fit your 2019 Toyota RAV4 Hybrid but this hitch does not fit (as of May 2019). Instead you'd want the etrailer part #e23ZR which is a fit for your vehicle…

view full answer...

Answer 3

For your 2018 Toyota RAV4 I recommend the Curt Trailer Hitch Receiver - 2" #C13149. This hitch is a custom fit for your vehicle, is easy to install, and will allow you the hands free liftgate function. The sensors will work well on either side…

view full answer...

Answer 4

For the etrailer hitch part #E98864 that you referenced it's going to block a portion of the liftgate sensor of your 2018 Toyota Hybrid but what you can do is kick your foot to either side of the hitch tube and the liftgate will open like normal.…

view full answer...

Answer 5

When towing with your 2018 Toyota RAV4 you always need to go by the lowest-rated capacity. I checked the owner's manual of an '18 RAV4 and it said that the maximum capacity if you do not have the towing package is 1,500 lbs and with the…

view full answer...

Answer 6

The Curt hitch part #C13406 and EcoHitch part #306-X7219 are both a confirmed fit for your 2018 Toyota RAV4 and will provide a trailer hitch that has a concealed crosstube making it less visible than most hitches overall. The key differences are that…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Does etrailer Trailer Hitch for 2017 Toyota RAV4 Interfere with Hands Free Lift Gate

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching