Recommended Bearing Kit For 7K Lippert Axles On Grand Design Reflection 367bhs
Updated 04/27/2017 | Published 04/26/2017
Products Featured in This Question
Question:
My husband and I purchased a Grand Design Reflection 367bhs. The axles are by Lippert. They are rated for 7,000 lbs. We have 2 xle set put on the 5er. What bearing kit do you have that will fit our axles?
asked by: Karen M
0
Expert Reply:
For your Lippert 7k axle you would want the part # BK3-200 if the seal inner diameter needed is 2.25 inches or part # BK3-210 for inner diameter of 2.125 inches. You can use a digital caliper like # PTW80157 to confirm size, or check the part number listed on the seal itself if it is legible. I've attached an article to help with this.
expert reply by:
Jason S
0
Product Page this Question was Asked From
Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Timken Bearing Kit, 14125A/25580 Bearings, 14276/25520 Races, GS-2125DL Seal
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation - 2009 Keystone Montana Mountaineer
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Shop: Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Shop: Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Search Results: trailer tires and wheels
- Search Results: 16 inch trailer wheels
- Search Results: trailer wheels
- Search Results: 7000 lb axle bearing
- Shop: Grease Seal - Double Lip - 2.125" ID - 3.376" OD - GS-2125DL
- Q&A: Replacement Bearings for a Dexter 7,000 lbs Axle and Wet Bolts for a Morryde CRE 3000
- Q&A: Replacement Bearings for a Kaufman Tilt Trailer with 7,000 lb Axles
- Q&A: Replacement Bearing Kit and Brake Assemblies for 2017 Jayco Pinnacle 36FBTS with 7000 lb Axles
- Q&A: Replacement Axle for Jayco RV Trailer
- Q&A: Replacement Bearing Kit for Lippert 7k Trailer Axle
- Q&A: Bearing Kit for Dexter 7k Axle on Fifth Wheel
- Q&A: Replacement Bearings, Races, and Seal for Lippert 7,000 Pound Axle