Could Kodiak XL ProLube Kit XLPROLUBE2440KIT Fit 7,000 lb Dexter D70 Hub
Published 04/20/2017
Question:
Hello, Will your above mentioned Kodiak XL ProLube Kit install on a Dexter Model D70, 7000 LBS. E-Z Lube axle, as the seals are the same size. Many thanks,
asked by: Larry
0
Expert Reply:
If the bore on your hub matches what the Kodiak XL ProLube Kit # XLPROLUBE2440KIT is designed to fit at 2.44 inches this kit would work well in the hub. When picking out replacement caps or in this case using this kit to convert to oil bath all that really matters is matching the seal and hub bore dimensions.
The seal dimensions are 2.25 inch inner and 3.376 inch outer.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 2.44 Inch
- 5200 lbs Axle
- 6000 lbs Axle
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer hubs and drums
- Search Results: 20419
- Shop: Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Search Results: 25580 bearing
- Search Results: 14125a
- Search Results: gs2250dl
- Shop: CE Smith Wobble Roller for Roller Bunks - 2-1/2" Diameter - 1/2" Shaft
- Shop: Yates Wobble Roller - Heavy-Duty Rubber - 4-1/4" Diameter - 3/4" Shaft
- Search Results: roller
- Shop: Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98"
- Search Results: kodiak oil bath hub kit
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Changing Trailer Hubs from Grease Type to Oil Bath Type
- Q&A: Recommended Disc Brake Conversion Kit for a 2019 Grand Design Solitude 373FB
- Q&A: How To Convert from Grease to Oil Bath Hubs
- Q&A: How to Determine the Correct Oil Bath Cap
- Q&A: Can Kodiak XL ProLube Kit Work on 7,000 lb. Idler Hubs
- Q&A: Replacing Grease Lube Hubs with Oil Bath Hubs
- Q&A: Converting 7,000 Pound Grease Hubs Over to Oil Bath Hubs
- Video: Ultimate Overview of the CE Smith Wobble Roller for Roller Bunks
- Shop: Replacement Trailer Hub Bearing - 25580
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath