Seal Recommendation for Trailer Hub Assembly DX22XR That Fits Spindle Diameter 1.50 inch

Question

Question:

The dimensions of this kit appear to fit the spindles I have on a boat trailer except for the grease seal inner diameter. My spindle diameter where the seals ride is 1.5OD and this kit has seals with a 1.68inch ID. Do you have the same kit except with 1.5inch ID seals? Ultimately, I just need a kit to fit my spindles. Any help would be appreciated!!! Thanks,

asked by: Bodie C

0

Expert Reply:

The grease seal part # SL150 has an outer diameter of 2.332 inches which means it will fit in the hub # DX22XR and an inner diameter of 1.50 inches so it will fit your spindle.

The hub # DX22XR with this seal should work well for you.

expert reply by: Jameson C

0

Answer 1

The Trailer Hub Assembly #DX22XR referenced in your question is a relatively unique hub that is typically used in military applications. It is designed for 2,500 pound axles that feature spindles/studs that accept an inner bearing with a 1.250 inch…

view full answer...

Answer 2

The difference between the single lip and double lip seals is that the double lip grease seal will have two rubber lips that are in contact with the spindle. The double lip grease seals are usually used in marine applications to give a better seal…

view full answer...

Answer 3

You have a shorter stub spindle on your axle which we do not have a replacement hub that will fit. The only solution we can point you towards for your trailer is a new spindle that is longer like the BT8 spindle part #TRU94FR which would then allow…

view full answer...

Answer 4

Sounds like you're needing the Redline Grease Seal #SL150. This has an ID of 1.5" and an OD of 2.332" like what you're needing. If your bearings are toast, then you'll want to replace those too. If you can get me part numbers or…

view full answer...

Answer 5

You can use the other components you remove from your hubs. After you have removed the hub components you will want to inspect all of the parts and replace if you find any discoloration or signs of wear or damage such as a nick. On the race you can…

view full answer...

Answer 6

In order to find the correct replacement hubs for your Shoreland'r boat trailer, you need to first know what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the…

view full answer...

Answer 7

Kenda is the name of the tire manufacturer, and Loadstar is the name of the model or tread design of the particular tire. If you click on the second thumbnail photo under the photo on the product description page, and scroll your cursor over it, you…

view full answer...

Answer 8

Part #168233, appears to be a close match to your existing grease seal with 2-5/16" (2.3125) OD and 1-11/16" (1.6875) ID. It has an ID of 1.688", OD of 2.332" and a thickness of 0.38". Although I wasn't able to cross…

view full answer...

Answer 9

We do have the Dexter Hub #84545UC1-EZ and our etrailer Hub #AKIHUB-545-35-EZ-K which has the same 5 on 4-1/2" bolt pattern as the Shorelandr 4470400. Both hubs include the same Inner #L68149 and Outer #L44649 bearings the Shorelandr hub uses.…

view full answer...

Answer 10

The Grease Seal #SL150 which has an inner diameter of 1.500, and an outer diameter of 2.332", is going to be the closest we have for that size grease seal. I recommend the Spindle Grease Seal Set #BB60007. This kit is designed to fit a…

view full answer...

Answer 11

Based on the measurements that you have provided, check out the outer bearing #LM11949 and race #LM11910. This bearing and race combinations has an inner diameter of .750 inches and an outer diameter of 1.781 inches. For the inner bearing and race…

view full answer...

Answer 12

After doing some research I was not able to locate a grease seal with a 1.500 inch inner diameter and a 2.500 inch outer diameter. I spoke with my grease seal supplier and they do not carry a grease seal with those dimensions either. If you are…

view full answer...

Seal Recommendation for Trailer Hub Assembly DX22XR That Fits Spindle Diameter 1.50 inch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching