Trailer Hitch Fit for 2017 Ram 1500 without Factory Hitch

Question

Question:

Will this hitch fit my 2017 dodge ram...

asked by: Mark

0

Expert Reply:

For your 2017 Ram 1500 without a factory hitch we have a very similar hitch that is a fit, but the one you referenced is for older Ram trucks. Instead you would want the part # 75662 which is confirmed as a fit.

I attached an install video for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The correct hitch for your truck will depend on what capacity you were needing. For instance, if you'll be towing trailers weighing less than 6000 lbs, a Class III hitch like the #75662 would be ideal. The hitch would bolt to the existing…

view full answer...

Answer 2

The Draw Tite hitch part #41948 is a confirmed fit for the 2017 Ram 1500. You will need to remove the factory hitch and install the Draw-Tite hitch. The maximum tongue weight is up to 1,500 lbs and the maximum gross trailer weight is up to 12,000…

view full answer...

Answer 3

The etrailer brand #e98852 and the Draw-Tite #75662 are almost identical. The capacities are the same, they'd both install in the same manner and they're very similarly priced. There are a few differences. The biggest difference is that the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

view full answer...

Answer 9

Hey Jascha, yes you can easily change the Kodiak disc brake kit part #KOD53FR to being an oil bath setup by just swapping out the seal to the part #9103309. What's really interesting about the part #KOD53FR is that it actually has oil bath type…

view full answer...

Answer 10

Hi Lee, cool camper! For 2,200 pound axles, you are going to want the Lippert Complete Bearing Kit for 2,200-lb Trailer Axles - L44649 Bearings, L44610 Races #LC23ZP. This includes the bearings, races, seal, cotter pin, and tang washer. It will be…

view full answer...

Trailer Hitch Fit for 2017 Ram 1500 without Factory Hitch

Featured Help Information

Miscellaneous Media

Continue Researching