Recommended Replacement Cradle For Rhode Gear Hitch Mounted Bike Carrier

Question

Question:

I have a Rhode Gear hitch mount bike rack with hard plastic cradles that are all broken. I would like to replace them with RG8890083 or RG8890084. The 2 arms on the rack measure 1inch OD but your information would indicate they require the 1 3/32inch cradles. Should I order the RG8890084 cradles with 1inch diameter centers?

asked by: Gordon M

0

Expert Reply:

The replacement cradles we carry for Rhode Gear bikes are designed to fit specific models.

The # RG8890083 will fit the Rhode Gear Highway bike carriers (8015200, 8015201, 8015202, 8015215, 8015216, 8015218, 8015219, 8015220, 8015221).

If your bike carrier is one of the Shuttle bike carriers(RG8015127 and RG8015126), then the # RG8890084 would be the replacement you can use.

Since you said your arms measure 1-inch I recommend going with the # RG8890084.

expert reply by: Jeffrey L

0

Answer 1

I have a solution for you, but I don't have the specific Rhode Gear Ultra Shuttle 3 straps. I do have the Replacement Strap for Cradles on Thule Bike Racks - Qty 1 #852-3006-001 that are very similar and may be compatible. This strap is 8-3/4…

view full answer...

Answer 2

There were actually only 2 different models for the Rhode Gear bike racks from Yakima. The Rhode Gear Highway is a 4 bike hitch mounted bike rack and the replacement cradle is part #RG8890083. The Rhode Gear Super Shuttle is a 3 bike trunk mounted…

view full answer...

Answer 3

We do have replacement cradles and straps available that are designed to fit specific model Rhode Gear Bike Carriers. Since you cannot locate the model of your existing rack, you can also measure the diameter of the arms that the cradles slide onto.…

view full answer...

Answer 4

Although the Rhode Gear Super Shuttle for 2 Bikes, part RG8015126, has been discontinued we still have some replacement parts available. Replacement Cradle w/ Strap - #RG8890084 Replacement Side Lower Strap - #RG8890248 I believe the part you are…

view full answer...

Answer 5

While we don't have any direct replacement straps for the Rhode Gear bike racks, one of our replacement straps from a different manufacturer may work well. The closest strap we have available to the dimensions you provided is with the Thule…

view full answer...

Answer 6

I went out to our warehouse to measure the strap for the Replacement Rhode Gear Cradle #RG8890084. I measured an overall length of 11-3/4 inches including the metal loop, or 11-1/4 inches for just the strap without the loop, and a width of 1 inch.…

view full answer...

Answer 7

The only replacement cradle part still available from Yakima for the Rhode Gear Spare Tire Shuttle is the #RG8890084 replacement cradle. According to Yakima, the Spare Tire Shuttle had a different diameter frame tube (1 inch) than other Rhode Gear…

view full answer...

Answer 8

Since your Rhode Gear Shuttle bike rack has 1 inch diameter rack arms the Replacement Cradle for Rhode Gear Super Shuttle Racks #RG8890084 that you referenced will fit it. The Shuttles all were made to fit at least 2 bikes so yours allowing you to…

view full answer...

Answer 9

We have a few replacement parts for Rhode Gear bike racks available though it is limited and I was unable to find a reference to your specific model. If your Rhode Gear was a Highway there is the Replacement Control Block #RG8890083; there is also…

view full answer...

Answer 10

Rhode Gear was bought out by Yakima and there are a few replacement options available still like the Replacement Cradle for Rhode Gear Super Shuttle Racks #RG8890084. While the #RG8890084 is not listed as a fit for the Rhode Gear racks with the bent…

view full answer...

Answer 11

For the Rhode Gear Super Shuttle you can use the replacement cradle, #RG8890084. These are sold in quantities of one. To replace all of the cradles on a 2 bike rack, you would need 4 cradles. The Super Shuttle has a capacity of 90 pounds. If the…

view full answer...

Answer 12

While Rhode Gear is no longer available we still do have a Rhode Gear replacement cradle part #RG8890084 which fits a 1 inch arm like your rack should have.

view full answer...

Recommended Replacement Cradle For Rhode Gear Hitch Mounted Bike Carrier

Continue Researching