How to Determine Correct Bearing Kit for 4X8 Trailer with 1 Inch Spindles
Updated 03/23/2017 | Published 03/22/2017 >
Products Featured in This Question
Question:
I have an old 4x8 trailer that has 1inch straight spindles on it and hubs that have an approximate inside diameter of 115/16 and 2inch across the middle. Not sure what I need and I do not have the old set that the trailer came with bearing kit
asked by: Jonathan P
Expert Reply:
We do offer a couple of bearing kits that may work for the spindle on your 4x8 trailer. I recommend first confirming the spindle measurement with a digital caliper like # PTW80157 if you have not already. Even the slightest difference in measurement can determine the correct bearing kit.
For example, the TruRyde Bearing Kit # DL21792 is for a 1 inch BT8 spindle and uses L44643 inner and outer bearings.
However, the TruRyde Bearing Kit # BK1-150 is for a spindle measurement of 1.063 inches and has different L44649 outer and inner bearings.
I have also attached a helpful article on replacing bearing, races and seals for you to check out.
Product Page this Question was Asked From
Bearing Kit with Grease Cap for BT8 Spindle, Bearings L44643, Races L44610, 34823 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- 2500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Spindle Nut 1"
- Shop: Bearing Kit with Grease Cap for BT8 Spindle, Bearings L44643, Races L44610, 34823 Seal
- Q&A: Correct Bearing/Race and Castle Nut Kit for 1 Trailer Spindle
- Q&A: How To Find Replacement Bearings for a Snow Bear Utility Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Bearing Kit Do I Need For A 2019 KZ-Durango 5th Wheel With Dexter 5,200 lb Axles?
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Replacement Trailer Hub Grease Seal for TCM 17255TB Seal
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Galvanized Hub For a Dexter 8-259 with a 1" Straight Spindle
- Article: Most Popular Wheel Bearings
- Article: Double-Eye Trailer Suspension System Review
- Article: Trailer Lighting Requirements
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Maintenance Schedule
- Article: Trailer Brakes Not Working? Troubleshooting Guide




