Recommended Complete Flat Tow Set-Up For 2004 Jeep Liberty

Updated 03/20/2017 | Published 03/17/2017

Products Featured in This Question

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3505)

$575.00

Blue Ox Patriot Portable Flat Tow Brake System - Proportional

(483)

$1579.55

etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel

(1325)

$39.38

Loctite Threadlocker 262 - High Strength - Up to 3/4" Nuts/Bolts - 0.20-Fl-Oz Tube

(113)

$10.85

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(415)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(669)

$62.57

Question:

what do I need to flat tow my 2004 Jeep Liberty? Thanks

asked by: Cliff

Expert Reply:

To flat tow your 2004 Jeep Liberty, I recommend starting with the Roadmaster EZ5 Base Plate Kit - Removable Arms # RM-521423-5. To install these base plates I suggest using Loctite Threadlocker # LT37420.

For a tow bar, I recommend the Roadmaster Falcon 2 Tow Bar - Motor Home Mount - 2" Hitch - 6,000 lbs # RM-520. I recommend using a hitch lock like # e98882 to secure your investment. You will also need safety cables like # RM-643.

For your vehicle wiring, I recommend the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles # HM56203 which is a nice plug and play system that connects to your factory wiring behind your tail lights. There is no cutting or splicing required.

For your supplemental braking system, I recommend the Blue Ox Patriot Portable Braking System - Proportional # BLU37TR. This system is easy to install and remove for each use. It simply connects to your vehicle brake pedal and rests on the floor board against the seat. It just plugs into a 12V outlet for power and wirelessly connects to the remote in your motorhome.

The final thing you will need is a high-low adapter. This is specific to each application, so I've attached an article to assist as well as connected the page to all your options for convenience.