Can Storage Boxes be Mounted on Front of V-Nose Trailer

Question

Question:

Please, Is there a tongue mounted tool box made that fits on the front of a cargo trailer with a pointed front wall? Thanks

asked by: Michael G

0

Expert Reply:

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached.

The part # DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long (back) x 18" long (front) x 19-1/2" wide x 17-3/4" tall.

expert reply by: Jameson C

0

click to enlarge

Charles M.

2/11/2020

Where can I get the bracket that holds these boxes on the v nose trailer from?

Reply

Jacob H.

2/12/2020

The bracket in the picture is a custom made bracket that this customer made to hold his two tool boxes.

Reply

Jeff

4/27/2020

Yeah I’m also interested in the bracket. How can I buy one.?

Reply

Chris R.

4/28/2020

Like Jacob mentioned, that bracket you see was custom-made by the customer who submitted the picture. Unfortunately it's not something that's available on our site.

Reply

Answer 1

We have a folding table that our customers have mounted to the outside of an enclosed trailer. Check out the Tow-Rax folding table, #TWSP45HFTA. This table is 45-1/2" Long x 18-1/2" Wide and when folded would only add about 3 inches of…

view full answer...

Answer 2

I am unaware of any specific place that has a spacer/extender which will work for your application in regards to the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel #AM3S130 rubbing your trailer frame. We do not recommend the…

view full answer...

Answer 3

It is likely that you will need a lug nut like the Americana #AM90049 that threads onto 1/2"-20 lug bolts. That being said, the wheel itself does not determine the necessary lug nut size. The best way to determine the correct lug nut is to…

view full answer...

Answer 4

I have a similar pivoting hitch adapter to the Kuat you mentioned that will work great for you but the #PVD20B only works with Kuat bike racks according to Kuat. The Yakima BackSwing Swing Away Hitch Extender part #Y02483 can be used with cargo…

view full answer...

Answer 5

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 6

The Mopar brake controller is identical to the one they put in at the factory on certain Ram trucks. It is made specifically to fit the trucks it was designed for. In the aftermarket options there is nothing that is going to fit the same but they are…

view full answer...

Answer 7

In order to actuate your trailer brakes, you'll need to install a brake controller to operate them, as your truck doesn't already have a brake controller. Since your Dodge Ram 2500 doesn't have the factory 7-way, not all the brake…

view full answer...

Answer 8

In order to use your reverse lights as utility lights you would have to have a separate 12 volt power wire running to the lights. You would need a switch and you would need diodes to prevent back feeding. You would need to run some wire from the 12…

view full answer...

Answer 9

The part #DZ91717P has dimensions of 36" long (back) x 18" long (front) x 19-1/2" wide x 17-3/4" tall. If you planned to install it on your trailer like what is seen in the picture I attached there's a pretty good chance the…

view full answer...

Answer 10

The Curt RockerBall Anti-Rattle Towing Kit #C43KR takes the additional height of the base of the RockerBall into account for the listed 4" rise and 5" drop. I have attached an image below showing how it is measured. Typically, you find the…

view full answer...

Answer 11

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

view full answer...

Answer 12

The 3,500 lb capacity Curt RockerBall Shock Absorbing 2" Hitch Ball #C94CR (40246) does not have a softer cushion than the 7,500 lb RockerBall #C40047. The cushioning is the same and the difference between these two is the capacity, of course,…

view full answer...

Can Storage Boxes be Mounted on Front of V-Nose Trailer

Product Page this Question was Asked From

Continue Researching