Which Ball Mount to Use with Draw Tite Hitch for 2008 Toyota Camry  

The Curt trailer hitch, #11064, does fit all models of the 2011 Honda Fit. You do not have to do anything with the exhaust on the vehicle for installation other than possibly lowering it to make installation easier. I have included a link to the…

Since you have a 2009 Honda Fit Sport you will not be able to use a trunk mount bike carrier because on the Sport models trunk mount carriers cannot be safely mounted to the vehicle. The options for carrying bikes are either going to be a roof mount…

I looked at the owner's manual for your 2018 Chevrolet Malibu and it states that the trailer should never be heavier than 1,000 pounds. It goes into more detail that other factors can influence the capacity (such as speed, altitude, temperature,…

For your 2011 Honda Fit Sport, I recommend the Curt Trailer Hitch Receiver - Class I #C11064. It is a custom fit for your vehicle and will give you a 1-1/4 inch hitch receiver opening for a ball mount or other accessory. I've attached a video of…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I found an online copy of the 2008 Honda Fit owners manual and on page 173 it states that the vehicle can be towed behind a motor home up to 65 miles per hour. It then lists the procedures for automatic and manual transmissions in the pages after…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…