Is the Bolt in Anti-Rattle Kit F-315 for 1-1/4 Inch Hitch Accessories a 1/2 Inch

Question

Question:

Is this a 1/2inch bolt??

asked by: Jim

0

Expert Reply:

Yes the bolt in anti-rattle kit # F-315 is a 1/2 inch. It was made for 1-1/4 inch hitch accessories with hollow shanks which all take a 1/2 inch pin/bolt.

expert reply by: Michael H

0

Answer 1

The Replacement Hitch Tite Anti-Rattle Hitch Pin for Saris Bike Racks with 1-1/4" Shanks #SA3015 is actually designed to only work with the Saris Bike Porter, Freedom, Axis Steel, Axis Aluminum, Cycle-On, T-Rax, Glide EX 4, and T-RAX Sport…

view full answer...

Answer 2

Thank you for the photo of your Allen Sports 532 RR Bike Rack! Most of the time there are specific bolts that fit bike racks, but according to my research it looks like your Allen 532 RR has a hollow shank so you can use the Anti-Rattle Trailer Hitch…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hello Todd, great question. The Yakima EXO Swing Away and Gear Locker #Y62VR is going to allow you to open the rear doors on your 2025 Sprinter 3500XD RV at around 90 degrees. Then with the box removed you may face a clearance issue with your…

view full answer...

Answer 5

Hey Jerry, thanks for reaching out. Yes the Curt Trailer Hitch Receiver #C11412 will indeed fit your 2019 VW Gold GTI. They way we have it listed is a bit confusing but basically it will fit the GTI and non GTI models. It might just be more…

view full answer...

Answer 6

Hey Kaitlin, congrats on your new tow dolly! We have all the parts you'll need but there's not an all in one kit available to add brakes to the older Demco Kar Kaddy's. Brake Mounting Flange for 2-3/8" Round Axle item #4-35 -…

view full answer...

Answer 7

The design of the shank on many accessories prohibits installation in Class I trailer hitches that have a tab in them. Class I hitches are designed with a tab, see accompanying photo, that keeps Class II accessories from being installed to avoid…

view full answer...

Answer 8

Hey Rich, thanks for writing in. You're thinking about this the right way. The short answer is this - no matter what hitch you put on your CR-V, you will still need to observe the 100 lb tongue weight spec for the vehicle. Your towing setup is…

view full answer...

Answer 9

The only option we have for the 2021 Toyota Venza is a 2" hitch. If you want to keep your bike rack, I recommend you look into the Curt Trailer Hitch Receiver #C89UR. This is a USA-made hitch that is high quality and easy to install, no welding…

view full answer...

Answer 10

I reached out to a representative of Yakima who told me that for the 1-1/4 inch diameter round crossbars of a SeaSucker roof rack like the #298-SX6000B, the Universal MightyMounts for Yakima Roof Mounted Accessories #Y03590 will fit around them. They…

view full answer...

Answer 11

For your 2018 Honda Civic coupe LX we only have one hitch option which is the part #C92UR. It requires a small bit of trimming of the rear bumper and fascia. You can see this process in the installation instructions and the install video link that is…

view full answer...

Is the Bolt in Anti-Rattle Kit F-315 for 1-1/4 Inch Hitch Accessories a 1/2 Inch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching